Plant computer Flashcards
______range iconics SPDS screen must be on display normally, after a ________, _____ iconics will be automatically displayed.
Narrow
Reactor trip P4
Wide range
Rad monitors change to ______ when one rad monitor reaches alert setpoint, changes to _____ when a high setpoint exceeded.
Yellow
Red
High TIC for ______ and _______ is at saturation.
CETC
WR RCS Pressure
With a PDMS inoperability, the following 4 TSs are impacted because they utilize PDMS for auto calculations:
3.2.1 Heat flux hot channel factor
3.2.2 Nuclear enthalpy rise hot channel factor
3.2.4 QPTR
3.2.5 DNBR spec not applicable when PDMS inoperable
MODE 1 with THERMAL POWER >= 50% RTP when Power Distribution
Monitoring System (PDMS) is OPERABLE.
PDMS readings are color coded as follows:
Green TS satisfied
Yellow <2% of TS limit
Red exceeding TS limit
Safety functions in order;
Subcriticality (s) Core cooling (c) Heat removal (h) Rcs integrity (p) Containment integrity (Z) Inventory (I)
RTP=_____MwT
3645
If shifted from LEFM to venturi, power limited to _____
98.3%
What data is displayed on the NR iconics?
Tave/Tref Power Mismatch Containment Temp/Sump Level Containment Radiation NR SG Level Net Charging Pressurizer Level Pressurizer Pressure Subcooling
What data are displayed on wide range iconics?
Core Exit Temperature Startup Rate Containment Pressure Containment Radiation WR SG Level RVLIS Pressurizer Level WR RCS Pressure Subcooling
What are the indications of an Iconics value exceeding the high setpoint and low setpoint?
High
Spoke moves to the high tic, high tic and display turn red.
Low
Spoke moves to the low tic, low tic and display turns red.
Power supply
Normal
Backup
Backup Backup
Primary Supply 480 VAC MCC _34V2 Backup Supply 250 VDC Bus _23 CVT 480 VAC MCC _33V2
