SOG 28-01 Carbon monoxide detector activation Flashcards
SOG 28-01 Carbon monoxide detector activation
Once on scene, personnel need to determine if `
rescue or removal of occupants is required, paramedics shall be notified if required
SOG 28-01 Carbon monoxide detector activation
all personnel entering the structure are to be wearing
PPE including SCBA
SOG 28-01 Carbon monoxide detector activation
if required personnel shall initiate
emergency patient care until paramedics are on scene
SOG 28-01 Carbon monoxide detector activation
if the department detector activates into alarm
personnel shall Don their SBCA
SOG 28-01 Carbon monoxide detector activation
CO Present- personnel should consider,
ventilating the structure to reduce any threats to life or property
SOG 28-01 Carbon monoxide detector activation
CO present- personnel should attempt to determine
the source of the CO
SOG 28-01 Carbon monoxide detector activation
possible reasons for CO may include (9)
- car running in attached garage
- operate g barbecue in an enclosed area such as a garage
- gas or wood burning fireplace
- blocked chimney
- Portable heater
- improperly installed kitchen range or cook top vent
- corroded or disconnected water heater vent pipe
- cracked heat exchanger in furnace
- leaking chimney pipe or flue
SOG 28-01 Carbon monoxide detector activation
Personnel shall request
Enbridge gas
SOG 28-01 Carbon monoxide detector activation
personnel should also consider ________ and or __________ structures for possible extension of CO and. or possible sources
neighbouring and or attached
SOG 28-01 Carbon monoxide detector activation
personnel should examine the occupants detector for
indication of false alarm
SOG 28-01 Carbon monoxide detector activation
possible explanations for an occupants detector activation and department equipment not are (4)
- the home detector is operating normally and has accumulated Carbon Monoxide over a period of time, resulting in an alarm condition
- if the area has been ventilated since the time of the exposure, the Altair detector Maya not encounter any CO
- the Altair detector may be faulty (possibly miss-calibrated) or the operator has improperly used detector
- false alarm due to the cross sensitivity of other chemical. consider a HAZMAT response to investigate other chemical sources
SOG 28-01 Carbon monoxide detector activation
CO Not present- advise occupants of possible causes and
provide direction on possibly obtaining a new detector
SOG 28-01 Carbon monoxide detector activation
Considerations- personnel should consider _______ _______ when removing occupants from a structure and if required act accordingly
weather condition