SOG 26-13 Insulated Electrical Glove Ensemble

Question 1

SOG 26-13 Insulated Electrical Glove Ensemble

The Insulated Glove ensemble consists of the following components and shall always be worn together(2)

Answer 1

inner safety rubber gloves

-outer leather protectors

Question 2

SOG 26-13 Insulated Electrical Glove Ensemble

insulated electrical gloves ensemble shall be found in the following locations (5)

Answer 2

• squads (one pair each)
• TR (one pair)
• P201, P206 (one pair each)
• facility maintenance vehicle (one pair)
• training division (one pair)

Question 3

SOG 26-13 Insulated Electrical Glove Ensemble

the Insulated electrical gloves ensemble is ______ and rated for a maximum use of _____ protection

Answer 3

class 0
1000 volts

Question 4

SOG 26-13 Insulated Electrical Glove Ensemble

all personnel shall use insulated electrical gloves ensemble to provide a safe barrier against electrical contact for tasks such as the following

Answer 4

• operating disconnect switched at potentially energized electrical panels and switched where the electrical panel is less that 750 volts and has not been compromised or damaged. flash protection is also required to be worn
• dealing with electric or hybrid vehicles where the high voltage components or cable are suspected to be damaged and or the high voltage fuse needs to be removed

Question 5

SOG 26-13 Insulated Electrical Glove Ensemble

insulated electrical gloves ensemble shall be stored in a

Answer 5

canvas pouch in a clean pouch in a clean, dry, cool, well-being ventilated location on the vehicle where it will not be subject to damage or puncture

• the canvas pouches and the leather outer gloves shall be marked with he appropriate vehicle designation to which that are assigned
• rubber gloves shall not be marked with vehicle designation to which they are assigned

Question 6

SOG 26-13 Insulated Electrical Glove Ensemble

the insulated electrical gloves ensemble will be inspected during the

Answer 6

weekly inspections and documented on the weekly inspection report

Question 7

SOG 26-13 Insulated Electrical Glove Ensemble

During inspection, personnel shall examine the following

Answer 7

• test date of the rubber inner gloves
• if more than 6 months have passed since the last test, remove from service
• the leather gloves shall be checked for any holes or excessive wear

Question 8

SOG 26-13 Insulated Electrical Glove Ensemble

prior to use (3)

Answer 8

• the insulated electrical gloves ensemble shall be inspected prior to donning as per the regualtion
• the leather gloves shall be checked for any holes or excessive wear
• prior to donning the rubber gloves shall be inspected visually for a valid test date and or physical damage. if the test is not valid and or the gloves are damaged, remove from service and forward to A n M for service or replacement

Question 9

SOG 26-13 Insulated Electrical Glove Ensemble

Donning (3)

Answer 9

• the insulated electrical glove ensemble shall be donned outside the hazard area
• the leather gloves shall always be worn over the rubber gloves as an ensemble
• insulated Electrical Glove ensemble may be donned at multiple incidents provided they first pass visual inspection

Question 10

SOG 26-13 Insulated Electrical Glove Ensemble

Testing rubber gloves exchange

Answer 10

• A and M shall establish and maintain the schedule for testing and exchanging of the rubber gloves
• replacement of the inner safety rubber gloves are to purchased and stored at the A and M division