MFP & Turbine Flashcards
Describe MFP seal injection
Injection pressure supplied by condensate booster pump header
- PCV maintains seal leakoff @ 150 psig(back Press)
- PCV maintains seal inj 30 psid > seal leakoff
Seal leakoff returns to Mn. Cond
What are loads off of ac oil pumps?
dc oil pumps?
Control oil
Trip oil
Bearing oil
Bearing oil
Pump-turbine coupling
Auto starts for MFP oil pumps?
ac-115 psig Pdisc of pump
dc-10 psig brng Press
Automatic trips on MFP & setpoints?
Overspeed 6370 rpm (elec), 6380 (mech) Lo-vacuum (mech), 10-15" Hg abs Lo-brng oil Press, 10 psig (mech) SI (elec) P-14, 2/3 Ls/g > 90% 1/4 S/G (elec) Hi MFP Pdisc > 1305 psig (elec) Lo Oil reservoir, 39" below flange (elec) Hi thrust brng wear, 20 mils (elec) Lo HPU press, 100 psig (elec)
Describe Woodward Hydraulic Power Unit?
Include setpoints
Oil skid that provides oil to positioner servos that control position of LP & HP governor valves
- two pumps, one running, one STBY, backup accumulator
- normal Press ~275 psig
- b/u starts @ 200 psig
- fwp turb trips <100 psig
Purpose of the high pressure oil accumulator
Prevents MFWP low oil pressure trip from a bus transfer
Control oil high pressure, trip oil high pressure, and bearing low oil pressure
Control oil high pressure 150#
Trip oil high pressure 150#
Bearing oil low pressure 20#
How do the servo positioners work and at what pressure is delivered to them.
Driven by the hydraulic power unit (hpu)
Supplies nominal 275# to HP and LP servo positioners
When does the HPU standby pump start
200#