A320 Lounge Indicating and Recording Systems 1 Flashcards
What is the name of the upper ECAM?
EW/D (Engine Warning Display)
What is the name of the lower ECAM?
SD (System Display)
What does TAT stant for?
Total Air Temperature
What does SAT stand for?
Static Air Temperature
Where would information about exceeding a G load be displayed?
Bottom middle of the lower ECAM, alongside the clock
When would G load information be displayed?
When outside of the limit of 0.7-1.4G for over 2 seconds
What does ISIS stand for?
Integrated Standby Instrument System
What does DDRMI stand for?
Digital Distance Radio Magnetic Indicator
What does FCU stand for?
Flight Control Unit
What is the FCU?
The autopilot control interface
What does EFIS stand for?
Electronic Flight Instruments System
Where are the EFIS controls?
The controls to the side of the FCU which control what is displayed on the ND
Which master warning faults cannot be silenced by pressing the master warning or caution push button?
Overspeed
L/G not down
How can you silence the CRC related to overspeed or L/G not down?
Pressing the EMER CANX push button
What does MCDU stand for?
Multi Function Control and Display Unit
What does RMP stand for?
Radio Management Panel
What does ACP stand for?
Audio Control Panel
What is the ECP?
The panel where you can select different systems for display on the SD
What does ECP stand for?
ECAM control panel
If you use the EMER CANX push button, can you then see what has been emergency cancelled?
Yes, at the bottom of the status page
How do you return a failure to the E/WD which has been emergency cancelled?
Press the RCL button for over 3 seconds
If there is a failure of the ECAM Control Panel, which buttons are still active?
EMER CANX, ALL, CLR, RCL and STS
When does APU light change from On to Avail?
When spinning at over 95%, and the generator is available
What does it mean when a pb is lit green?
Normal system operation
What does it mean when a pb is lit blue?
Normal operation of a system which is being used temporarily
What does it mean when a pb is lit amber?
A failure that the flight crew should be aware of, but doesn’t need immediate action
What does it mean when a pb is lit red?
A failure requiring immediate action
What does it mean when a pb is lit white?
Abnormal pb position
What does it mean when a pb is lit with two dots?
That section of the button is not used (eg cabin fans, to show that the LED hasn’t gone, and that there is actually no other portion of the button which can light)