Traction - Attach And Divide

Question 1

Name the two main types of attach

Answer 1

Attaching to non stabled unit at platform

Attaching to a stabled unit in a siding or platform

Question 2

How many drivers are needed to attach a non stabled unit at a platform?

Answer 2

2 drivers

Question 3

How many drivers are required for a stabled unit in a siding or platform?

Answer 3

1 driver

Question 4

When attaching trains what is the procedure?

Answer 4

Brake pipe or safety loop continuity test
Drivers must not enter a station pit unless a reactive track access is provided
Ensure all passengers are off the train
Do not couple different trains electrically
Siemens and Xtrapolis trains must be de activated prior to attaching

Question 5

What other safety precautions are needed for attaching?

Answer 5

Spring park brakes are applied to the unit being attached
Coupler in good condition
Cocks open
Saloon doors closed and locked
Electrical switch in electrical or isolated position if attaching to another train

Question 6

When attaching at platform what should the headboard read?

Answer 6

Not in service

Question 7

What must happen when attaching to a stabled unit in a siding and pantos are up?

Answer 7

Stop 1 meter away
Carry out full cab
Check for safety banners ect
Ensure park brakes are on

Question 8

What must happen when attaching to a stabled unit in a siding and pantos are down?

Answer 8

Stop short one meter
Carry out full cab 
Check for safety banners
Ensure park brake is on
On Siemens or Xtrapolis ensure cabs are shut down
Raise all pantos on the train

Question 9

What must a driver complete of safe to do so?

Answer 9

Ensure main res and brake pipe end cocks are open
Ensure couplers line up
Ensure couplers and mouth pieces are in good condition
Electrical switch is in electrical position