Siemens Train Preparation and Stable Flashcards
Can you attach to a stabled unit?
No
Can you do a continuity on your own?
No you must do a mainline prep
From what cab does the dividing driver divide from?
Leading centre
How far from the 6 car mark should a driver stop for a divide?
1 meter
What parameters need to be met to complete a vicers test?
Master selector to forward
Master controller to 0
Press vicers test button
What happens during a vicers test?
Safety loop will active at reset twice Audible tone will be heard Acknowledgement button will flash Vigilance repeater light will flash Vigilance fault light will illuminate then extinguish
What is your responsibilities after completing a multi prep?
Put a multiple prep docket in the leading cab in the TMM clip
Inform Daos that the prep is complete
When stabling what is crucial before leaving the leading cab?
Park brake light is illuminated
Upon arriving at a terminal station what is the drivers duties regarding the rear of the train?
Ensure marker lights are displaying red and headlights are off
What fault light needs to extinguish after pressing stable?
Line voltage
What are the time limits for stabling a train?
6 car set = 8 minutes
3 car set = 4 minutes
How will a driver be made aware of a scheduled stable?
Roster Book
Daos
Train control
When stabling, what are our duties in the lead motor car?
Lamps test Master controller to B6, selector switch to neutral Key to off and out BC to emergency pressure Park brake is illuminated Trip lowered status extinguished Exit b side ensuring door is locked
What do we do in the centre cabs for a stable?
Ensure doors are locked
Blinds are down
Equipment off
