Deck 103 Flashcards
The CIDS program is also designed to work in conjunction with the Departments Pre-incident Guideline (PG) program.How does BC use this info?
Chief Officers receiving CIDS messages beginning with the FD designation PG shall refer to such guidelines AS NECESSARY while responding to and managing incidents at these locations.4.1.1
What If the address of the fire or emergency is not a CIDS building how will cids program identify ?
If the address of the fire or emergency is not a CIDS building but is on the same side of the street and is within three house numbers of a CIDS building, the computer will identify the CIDS building(s) to the borough dispatcher. The dispatcher will notify the Incident Commander (IC) of this fact via radio if (PRELIMINARY OR PROGRESS REPORTS INDICATE THAT EXPOSURES ARE A CONSIDERATION.) THE IC must be aware of these provisions and always verify that the CIDS information relates to the building at which operations are being conducted.4.2.4FYI: can have Odd and Even Address same side street.CR- Comm 2 (2.2.4C) verbal hit telerprinter if w/in 2 blocks firehouse
NOTES: New 1/13 BWSTRG4.3.1 Company Officers must consider all buildings in their administrative area as potential CIDS buildings. In considering a building they must look for conditions that would not be immediately apparent to arriving units.It is mandatory that every building that is listed as a Bowstring Truss (BWSTRG), CFR Hold (CFRH), Major Alteration (MJALT), Pre-Incident Guideline (PG), or Rehabilitated (REHAB), be included in the CIDS program.
see other side
How can Immediate entry of an imminently hazardous condition can be accomplished by adm unit?
Immediate entry of an imminently hazardous condition can be accomplished by the Borough Commander or Command Chief on duty. The administrative unit shall complete a CIDS entry using the “Blank CD-201” form link located within the eCIDS application. This completed paper form shall be faxed via the chain of command with all endorsements to the Borough Commander or Command Chief. Once approved, the Borough Commander or Command Chief will fax the form to the Fire Department Operations Center (FDOC) for immediate entry into both Starfire and the eCIDS application. No action is necessary by the unit officer within the eCIDS application for an “immediate CIDS”. The immediate CIDS message entered into eCIDS by FDOC will appear on the administrative units pending list awaiting the next scheduled permanent export into Starfire.
Chief D FYI possible integity quest?4.4.2Specific InstructionsThe following procedure shall be used for completing a CIDS Entry:Prior to entering information into the eCIDS application the submitting officer shall refer to the FDNY Map Application and the FDNY Building Information Search (FDNY BIS) on the FDNY Intranet (Note: links to both applications have been provided within the eCIDS application). These applications contain the most current data available to our units and will provide the company officer with the information necessary to properly submit or revise a CIDS entry or entries. These applications contain information relating to address numbers, multi-number address ranges, “AKA’s”, and administrative company boundaries associated with a building or BIN number if applicable.
see other side
True?false?For a Single Building – Multi-Number Address Range Posted Any address number (odd or even) within the range , having the same BIN number will require a separate CIDS entry.
True.4.4.2Any address number (odd or even) within the range 100-110 Main St., having the same BIN number as 100 Main St., will require a separate CIDS entry.EXAMPLE: Prior to entering a CIDS for 100-110 Main St., the officer will enter all numbers within that range into the FDNY BIS separately (100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110). Any number(s) within that range having a matching BIN number with 100 Main St., will require a separate CIDS entry. The above entries into the FDNY BIS will most likely indicate that a CIDS entries need only be submitted or revised for the address numbers (100, 102, 104, 106, 108, 110 Main St.) but is still required due to some areas of the City having multi-number address ranges containing both odd and even numbers.
True?false?For a Single Building – Multi-Number Address Range - Single Address Posted Any address number (odd or even) within the range , having the same BIN number will require a separate CIDS entry.
False. KEY words -( APPLICABLE), -(DETERMINED) page 5When a single building has a multi-number address range listed in the FDNY BIS or FDNY Map Application, but only has a single address number from within that range posted on the building, CIDS entries shall be prepared for any( APPLICABLE) address numbers within that range as (DETERMINED) by the preparing unit officer. See the “Buildings with more than one Legal Address or AKA” section below.Buildings with more than one Legal Address or AKA – Unit officers shall utilize onsite inspections in conjunction with the other resources provided (FDNY BIS, FDNY Map Application etc.) prior to submitting or revising a CIDS. It shall be the responsibility of the unit officer submitting or revising the CIDS entry to determine which additional listed addresses are applicable (i.e. may be used by a caller to report a fire or emergency at that location) and submit the additional CIDS entries if required. When applicable, the other known address or addresses should be included in “Transmitted Data” portion of each CIDS entry.
Chief D FYI.Special Name/Place File:1. If a building or facility has a unique and distinctly recognizable name, a separate CIDS entry shall be entered for its Special Name/Place in addition to its address or addresses. (See addendum 2 of this document for detailed instructions referring to Special Name/Places). This requirement is necessary to ensure that CIDS information will be forthcoming even if only the name of the building is given by a person reporting a fire or emergency.EXAMPLE: Madison Square Garden 420 8th AvenueNote: Special Name/Place file entries are intended for unique and distinctly recognizable locations and not intended for multi- location type occupancies or other common tenant names.EXAMPLES: McDonalds Joes Pizza
see other side
A building constructed of metal “C” joist or steel bar joist would be classified as a ?one correct.A-CL2LW.B-CL4LW.C-CL3LW
A correct page 8 GS A building constructed of metal “C” joist or steel bar joist would be classified as a CL2LW. A Class 3 building renovated or repaired using any type of structural Light-Weight materials would be classified as CL3LW A wood frame building using wood truss construction or laminated I beams would be classified as CL4LW. A detailed description of the construction material or construction techniques used would be included in the transmitted data portion of the CIDS card. LW after the construction classification should prompt the reader to consult the “transmitted data” for specific information on the type of Light-Weight Construction Materials used. If submitting or approving officers deem necessary, and space allows, the date the building was constructed or altered can also be included within the “transmitted data” to provide insight into the construction techniques used.
True?false?If a Unit discovers an imminently hazardous condition it must be entered immediately by completing black cd-201and faxed chain of command as procedurees in 4.3.3
false.4.5.1Only the administrative unit shall submit or revise CIDS entries for buildings within their administrative district. Units discovering a potential CIDS entry for buildings not located within their administrative district shall immediately notify the administrative unit of the particulars. The administrative unit shall evaluate the building and submit a CIDS entry electronically using the eCIDS application if necessary.
Examples of CIDS Entries:APPENDIX BChief D highlights:he pointed out L/WPD 3 STY 25X60 CL4LW-L/W WOOD JOIST TRUSS ON ROOF AND FLOORING ALL FLRS YEAR BUILT 2008He pointed out NO RF OPS-INTERIOR OPS AFTER IC EVAL FOR ANY FIRE IN BLDGBWSTRG-GARAGE 1 STY 100X150 CL3 CEILING COVERS WOOD TRUSSESNO RF OPS-INTERIOR OPS AFTER IC EVAL FOR ANY FIRE IN BLDG
see other side
CFRH REQUIREMENTSIn order to remove the facility from the response matrix, the company officer shall ensure that the facility meets all the following criteria:A- On duty personnel are trained in CPR.B-Trained personnel are able to provide oxygen to the patient.C- On duty personnel are trained in the use of a defibrillator, and all the necessary equipment is available to the trained personnel.D- All equipment and appropriately on call trained personnel are available during all hours of operation.E- All correct
D IC not on call i added that. 2.1 Comm 4 add1 On duty personnel are trained in CPR. Trained personnel are able to provide oxygen to the patient. On duty personnel are trained in the use of a defibrillator, and all the necessary equipment is available to the trained personnel. All equipment and appropriately trained personnel are available during all hours of operation.A DOCA- All hoursD-defibrillatorO-oxygenC- CPR
True/FalseOnce facility is approved as CFRD in CIDS units will not hace respond to facility for any medical calls.
False 1.2 Comm 2 Add 1Certain call types, notably segment one types, identified as cardiac arrest or choking, require additional resources in a timely manner to increase the quality of medical care, and survivability rate for those patients. Therefore, for segment one type calls classified as cardiac arrest or choking, CFRD units will respond to facilities listed and approved as CFRH in CIDS. For all segment two and three requests, the CFRH will be in effect and no CFRD unit will be dispatched.
If a CIDS entry was disapproved and returned by the Division, what must BC do?
Note: If a CIDS entry was disapproved and returned by the Division, the Battalion will see an “N” under the DC Approval heading. The Battalion can “mouse over” the Y in the Misc Info column to view the most recent disapproval reason(s). Battalion must retrieve message and disapprove the same entering reason prior to the administrative unit being able to revise entry and re-submit.Comm 4 add 2 4.2
True/False?BC and DC have the option to “Revise and Approve” a CIDS in lieu of disapproving and returning it.
True Comm4 add2 page 20A BC also has the option to “Revise and Approve” a CIDS in lieu of disapproving and returning it. Clicking “Revise & Approve” will open up all 4 lines of transmitted data; any revisions made to CIDS prior to approval should follow the applicable instructions in section 4 of this document. The BC revising and approving a CIDS will be required to enter a reason (max 500 characters) for the revision and approval in order to inform other levels of command of changes made. Upon submission of the revised and approved CIDS, an email containing a link to a printable version of the revised message will sent to the administrative unit.
