Xtrap Pneumatic, Suspension, Brake Flashcards
Main reservoir pressure
750 to 900 kpa
Main reservoir safety valve
980 kpa
Brake pipe pressure ( normal)
0kpa
Brake pipe pressure ( rescue)
550kpa
Holding brake cylinder pressure
120kpa
Full service brake pressure
190kpa
Emergency brake pressure
210 kpa
At what pressure does the air compressor start to operate
650kpa
What will happen if you turn the compressor governor isolating cock
When the compressor is running it will continue to run non stop
If the compressor is stopped it will not start
Auxiliary reservoir air is used for what brakes
Pneumatic braking system( friction brakes)
Name the 5 cocks in the auxiliary pneumatic equipment panel
Whistle
Coupler uncoupling
Trip cock device cylinder
Trip cock device reset
Auxiliary pneumatic panel
What is the purpose of the trip cock device cylinder/ active
Isolate the trip and rendering it in the lower position
What is the purpose of the trip cock device reset
If the trip does not want to reset check cock
How many brake blocks per wheel
1
On what wheels are the park brakes located
1,3 and 7
What does the primary suspension consist of
2 rubber mounted springs
Suspension that is bogie to bogie is primary or secondary
Primary
Suspension that is bogie to saloon is primary or secondary
Secondary
Name the 4 brake systems on the xtrap
Service brakes
Holding brakes
Emergency brakes
Spring park brake
Service brakes are the blending of what 2 types of brakes
Electro dynamic ( ED)
Electro-pneumatic (EP) friction brakes
If the ED brake is in effective or wheel slide what brake replaces it
EP friction brakes
ED brakes operate at what speed
Above 10km
At what speed does break bleeding happen
5-10km
At what speed does the ED brake drop out and is replaced by EP brakes
5km
At what speed do holding brakes apply
0.5km
What applies spring park brakes
Spring pressure as main res air depleted
What release spring park brakes
Main res air at increase
Name the 5 emergency mode switch
- Online holding brake inhibit
- Normal
- Rescued
- Rescuing
- Rescuing in propulsion
Rescue:
At what pressure does the safety loop open
Below 300kpa
Rescue:
At what pressure does the safety loop close
430kpa
What pressure is the brake pipe during normal operating condition
0kpa