HCMT Driver Display And Comm

Question 1

How far from the platform stopping mark does the stopping aid camera start to work

Answer 1

10m

Question 2

What colour lines will you see on the stopping aid camera and where do you stop in these lines

Answer 2

Red and green
With the green line as close as possible to the stopping mark but not outside the 2 red marks

Question 3

How many cameras does each car have

Answer 3

4

Question 4

How far past the platform does the SDU blank the body side cameras

Answer 4

20m after the whole train has cleared the platform

Question 5

What will happen in the drivers cab when someone presses the PI

Answer 5

Alert tone
PI button will flash comm panel

Question 6

Once a PI call is made the CCTV comes on automatically, true or false

Answer 6

False
Only when the call has been answered

Question 7

If a PI call is not answered, how long before it transfers to metrol

Answer 7

30 sec

Question 8

What button needs to be pressed to talk to someone in the saloon

Answer 8

PTT

Question 9

If a DER is pulled will the image show automatically on the SDU

Answer 9

Yes and the car will illuminate in red with a EED icon and banner

Question 10

Name the 4 things the eTIS will show

Answer 10

• Provide relevant info: current alarms, status, train stopping
• Report alarms for immediate fault evaluation level 1 and 2
• responds to entry/alterations of the TDN to change service
• allows train maintenance to diagnose and update each of the on board subsystems

Question 11

What does the automatic selective door control do

Answer 11

Manages automated enabling and disabling of passengers doors when train stops at a platform

Question 12

How do you turn the HCMT on/ activate TMS/HMI

Answer 12

MC to on
Place card against HCMT card reader

Question 13

How do you know if “other cab active” is active

Answer 13

TMS will display notification

Question 14

What are the 2 heartbeat of the TMS

Answer 14

Sliding icon
Colour pulse “e”

Question 15

What other ways can you ID a frozen screen

Answer 15

Frozen date/time
Frozen effort achieved indicator
Timetable not advancing
Doors appear locked while CCTV shows pax entering/ exiting train

Question 16

What does a level one alert sound like

Answer 16

Audible tone in low- high pattern
Flashing red bar
Pictogram will flash and highlight

Question 17

What does a level two alert sound like

Answer 17

Audible tone in low- high pattern
Flashing yellow bar

Question 18

What does a level three alert look like?

Answer 18

Yellow bar will remain steady

Question 19

Describe the critical alert tile

Answer 19

Red tile next to the “e” logo

Question 20

Will the train pictogram tell you if the panto is up or down and what colour marker lights are at each end

Answer 20

Yes

Question 21

What does grey inside door status indicate

Answer 21

Door close and inhibited

Question 22

What does green inside door status indicate

Answer 22

Door closed but not inhibited

Question 23

What does white outside door status indicate

Answer 23

Door open

Question 24

What does red inside door status indicate

Answer 24

Door failed ( defective)
Steady, solid red box
Or
Flashing red box
DER has been pulled

Question 25

What does yellow inside door status indicate

Answer 25

Door isolated

Question 26

What does blank/empty inside door status indicate

Answer 26

Unknown status

Question 27

The system status screen will show 3 things

Answer 27

Ok
Isolated
Failed

Question 28

Name the 4 screens in the drivers cab from left to right

Answer 28

Back up screen
Surveillance display unit (SDU)
Driver machine interface (DMI)
Human machine interface (HMI)