HCMT Cab Equipment Flashcards
What does the cab emergency access device do and how long should you press it?
It allows the cab door to be opened in an emergency when the cab is active
Press it for 10 seconds
What does the EAD inhibit do?
Prevents the cab EAD from releasing the cab door for 5 minutes to prevent unwanted entry
What is the cab emergency equipment? (6 answers)
• First Aid Kit
• ATWS
• ETCJC
• Switch stick
• Red and green flags
• Fire extinguisher
How is the seat adjusted?
Electrically and pneumatic
What must you do before tapping your card on the badge reader?
Turn master control switch to on
What are the positions of the master controller switch?
ON
OFF
Positions of the reverser?
Forward
Neutral
Reverse
Off
What are the positions of the master controller? (7 answers)
Emy
Max brake
Braking zone
Min brake
Coast
Min power
Powering
When you let go of the master controller. How long before the Emy brakes apply
1.5 seconds
How long should the door open/close buttons be pressed in the cab?
2 seconds
How do you reset an emergency brake?
Come to a complete stop
What are the 6 safety isolation switches?
• MR pressure switch
• Traction Interlock
• Zero speed bypass
• Trip bypass
• Driver safety device bypass
• HCS isolate
What are the positions of the recovery switch?
0- default
1- Pushed by other train
2- Pulling other train
3- Pulled by other train
4- Pushing other train
What is the 3 positions of the fresh air damper
Open
Auto
Closed
When the safety system bypass tile on the fault panel is illuminated, what 5 systems have been bypassed
Traction interlock
Zero speed
Trip
Driver safety device
HCS isolate
