TB 80 Nylon Utility Strap

Question 1

TB 80 Nylon Utility Strap

___ foot long strap made of one-inch nylon webbing.

Answer 1

12

Question 2

TB 80 Nylon Utility Strap

The one inch webbing has a tensile strength of ____ pounds.

Answer 2

4,000

Question 3

TB 80 Nylon Utility Strap

There are three knots that must be mastered to apply the strap to these uses, they are the “Overhead Follow-Through” (Water Knot), “Ring-Hitch” (Larks Foot), and the “Half-Hitch.”

Answer 3

reference

Question 4

TB 80 Nylon Utility Strap

During the evaluation period, this utility strap was tested in several applications and resulted in three approved uses:

Knots

Hose Harness

Ladder Strap

Search and Rescue Tether

Answer 4

reference

Question 5

TB 80 Nylon Utility Strap

Wash with dish soap and warm water; rinse thoroughly with cool water and air dry out of the sun light.

Answer 5

reference

Question 6

TB 80 Nylon Utility Strap

To put into operation as a hose harness, use the following procedures:

1. Tie the two ends of the strap together using an “overhand follow through.” The strap will now form a continuous loop.
2. Place a “ring-hitch” approximately 5 to 6 feet from the base of the nozzle.
3. Place a “half-hitch” approximately 2 to 3 inches on the nozzle side of the “ring-hitch” knot.

Answer 6

reference