Sim 1 Phase

Question 1

List the Safety Function Status Checks for Reactor Trip

Answer 1

Question 2

If you overcool during SPTA’s, (Tcold less than 560) what procedure should be entered?

Answer 2

Excess Steam Demand
(you will not meet the RCS Heat Removal safety function of Rx Trip)

Question 3

List the Safety Function Status Checks for LOCA

Answer 3

Question 4

Can you find Containment Sump level on QSPDS?

Answer 4

Yes

Inputs (direct inputs, except CIAS):
* PZR Level
* SG Level, Pressure, and ∆P (RCS flow)
* AFW flow
* CTMT Pressure, WR Sump Level, H2, Area Radiation
o Not CTMT temperature

Question 5

List the HPSI Throttle Criteria:

Answer 5

HPSI Throttle Criteria
IF at least one HPSI Pump is operating
AND ALL of the following conditions exist:
* RCS is 24F [44F] or more subcooled
* Lpzr > 10% [15%] and NOT lowering
* The unisolated SG is available for RCS heat
removal with Lsg at 45%-60% NR or headed there.
* RVLMS indicates RVUH level > 16% or more
THEN throttle HPSI flow or secure the HPSI
pump(s).

Question 6

Do you use normal or harsh values during SPTA’s?

Answer 6

normal values during SPTA’s, do not use harsh (bracketed) until in an ORP

Question 7

What is the primary radiation monitor for detecting fuel damage?

Answer 7

• RU 155D primary indication of clad failure
• Adhering to 3.4.17 RCS activity (I-131< 1 uCi/gm Xe-133 <550 uCi/gm) will Ensure offsite and CR does not exceed dose during SGTR