TB 092 - Ideal Model 61-249 Voltage Tester

Question 1

The following instructions are provided for the safe use of the Ideal Model 61-____ Voltage Tester

Answer 1

249

Question 2

The voltage tester is an inventory item carried on all ______ companies These same voltage testers can also be found in the equipment room at each Metro Rail Red Line Station.

Answer 2

Truck

Question 3

Ideal Model 61-249 Voltage Tester:
Department members SHALL NOT test voltage systems exceeding _____ volts

Answer 3

1,000

Question 4

many City street lighting systems are _____ volts.

Answer 4

4,800

Question 5

This voltage tester may be used to test AC or DC voltages ranging from __ to ____ volts

Answer 5

1 to 999

Question 6

Ideal Model 61-249 Voltage Tester:
Voltages of ____ volts or more will be indicated by a pulsating buzzer warning

Answer 6

500

Question 7

Ideal Model 61-249 Voltage Tester:
Powered by one __V battery

Answer 7

9

Question 8

Ideal Model 61-249 Voltage Tester:
Battery life is approximately _____ tests until “low battery” sign appears

Answer 8

3,000

Question 9

If the input voltage is less than __ volts, then press the two test prods together and push “_____” Button

Answer 9

4
Test

Question 10

If the input voltage of the circuit to be tested is greater than __ volts (AC/DC), the tester switches on automatically

Answer 10

4

Question 11

The tester will automatically switch off within __ minute after prod contact with an energized circuit

Answer 11

1

Question 12

Place one prod on the suspected “_____” electrical equipment and the other prod on a “______”

Answer 12

Hot
Ground

Question 13

In a situation where it is difficult to read the display, you can “______” the reading even
when the voltage tester is no longer connected to the input voltage

Answer 13

freeze

Question 14

A ____ second audible signal will sound when the tester reads a stabilized voltage which is when the hold button should be activated

Answer 14

2.5

Question 15

Ideal Model 61-249 Voltage Tester:
For voltages of ____ or less, firefighting gloves shall be worn. (Rubber electrical
gauntlets with leather gloves may be worn in place of firefighting gloves.)

Answer 15

600

Question 16

If the equipment is energized, it will register on the display window. Any voltage over ___V should be considered energized

Answer 16

10