Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

AO Study Program Carlos Cativo > TB 067 - Holmatro Rescue Tool > Flashcards

TB 067 - Holmatro Rescue Tool Flashcards

1
Q

Both units are powered by __ cycle, air cooled Honda engines and use a __________ displacement pump to draw and pressurize hydraulic fluid from the reservoir

A

4
Positive

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Both power units utilize a two-stage pump design capable of producing _______ psi

A

10,500

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Initial extrication operations will only require use of the first stage pump, which is near ______ psi

A

3,000

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

This “change over” to the second stage can be recognized by a momentary “________” of movement of the tool followed by a continued movement in the direction selected

A

Stalling

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Members using the tools need to keep the _______ handle in the desired position during the “change over” phase to utilize the second stage of the pump

A

Trigger

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Holmatro Rescue Tool - The fluid used in both pumps is a ___-weight mineral based hydraulic fluid that is pale or light _______ in color and is non-corrosive

A

22
Yellow

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

PPU 15 - ___ lbs.

A

35

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

PPU 15 - ____ horsepower Honda engine

A

2.5

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

PPU 15 - ______ rpm (set at factory)

A

4500

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

PPU 15 - ____ quarts regular unleaded gasoline

A

1.3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

PPU 15 - ______ cc usable hydraulic fluid

A

2000

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

PPU 15 - ______ tool operation

A

Single

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

DPU 30 - ___ lbs.

A

58

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

DPU 30 - __ horsepower Honda engine

A

3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

DPU 30 - _____ rpm (set at factory)

A

3600

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

DPU 30 - ____ quarts regular unleaded gasoline

A

1.5

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

DPU 30 - _____ cc usable hydraulic fluid

A

3000

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

DPU 30 - _____ pump for simultaneous tool use

A

Dual

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

There is currently one spreader unit used on the truck companies. It is model ______ UL

A

3260

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

The trigger handle is of the “_____ _____” design which when rotated _________, causes the spreader to open

A

“Dead Man”
Clockwise

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

A built-in _____ valve will keep the tool in its current position when the trigger handle is released while under load in either direction

A

Check

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

They are equipped with a “_____ hook” used to connect to the C-__ rated chain also provided.

A

Grab
8

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Usually only ____ cutter tip is used, while one spreader tip is used as a base

A

One

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Because of the powerful force employed while cutting with the Holmatro cutters, extreme care should be used to ensure that the tips of the cutters DO NOT _____ over on the opposite side of the blades

A

Cross

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
__ models of cutters are currently being used by the LAFD
3
26
1. Cutters 3020 UL - _______ lbs. cutting force
63,400
27
1. Cutters 3020 UL - _____" opening
5 1/4”
28
1. Cutters 3020 UL - ______ lbs.
27 1/2
29
2. Cutters 3035 NCT (New Car Technology) - ________ lbs. cutting force
57,320
30
2. Cutters 3035 NCT (New Car Technology) - ______" opening
5 5/8”
31
2. Cutters 3035 NCT (New Car Technology) - ______ lbs.
33 1/2
32
3. Cutters 4050 NCT (New Car Technology) - __________ lbs. cutting force
208,000
33
3. Cutters 4050 NCT (New Car Technology) - _____" opening
7 1/8”
34
3. Cutters 4050 NCT (New Car Technology) - ________ lbs.
37 1/2
35
1. TELESCOPIC RAM 3340 - ___" retracted to ___" fully extended
12” 23”
36
1. TELESCOPIC RAM 3340 - _______ lbs. force - 1st stage, _______ lbs. force - 2nd stage
49,210 18,210
37
1. TELESCOPIC RAM 3340 - ___ lbs
24
38
2. TELESCOPIC RAM 3350 - ___" retracted to _______" fully extended
21” 50 1/4”
39
2. TELESCOPIC RAM 3350 - _______ lbs. force - 1st stage, ________ lbs. force - 2nd stage
49,210 18,210
40
2. TELESCOPIC RAM 3350 - ___ lbs.
37
41
Each truck company also carries an _______ Ram Support that can be used in conjunction with the telescopic rams
HRS 22
42
HRS 22 has two objectives: 1. it provides a purchase point nearer to the object to be ________
Pushed
43
HRS 22 has two objectives: 2. it helps to spread the ______ load against an object, giving the ram end a wider and more stable purchase point
Force
44
The hoses supplied with the Holmatro rescue tool come in two colors, ______ and ______
Orange Blue
45
Holmatro Hose Length: ___’ feet
32
46
The design of this hose is unique to the fire service to where the ______, high pressure (supply) hose is encapsulated and protected by the ______, low pressure (return) hose
Inner Outer
47
Both inner and outer hose are constructed of ___________ and reinforced with Kevlar-like Aramid fibers, which make them resistant to kinking
Polyurethane
48
There are ______ restrictors at each end of the hose, which provide protection where the fitting and the hose meet
Bend
49
Holmatro Rescue Tool - The working pressure of the hose is _______ psi
10,500
50
Holmatro: Hose burst pressure rating of __ times that or _______ psi
4 42,000
51
These couplers have a built in automatic return valve that eliminates the need for a dump valve on the pump and allows the "____ _______" of tools
“Hot Swapping”
52
PRESSURE RELIEF DEVICE - place male end of the hose coupler into open end of device & turn __________
Clockwise
53
To avoid the inadvertent build-up: Spreader - Close until tips touch, then open (____")
1/4
54
To avoid the inadvertent build-up: Cutters - Open or close blades until tips ______. If the cutter will not fit in the compartment this way, open completely, then close ________.
Cross Slightly
55
To avoid the inadvertent build-up: Rams - Fully retract piston, then open (____")
1/4
56
The manufacturer only guarantees a __________ deployment into the Secunet.
One-Time
57
Holmatro: Weekly Check - The unit should be started and run for at least ___ minutes to ensure a smooth operation
15
58
Weekly Checks: While the power unit is running, connect a section of hose with a hand tool, operate the tool to its full open or closed position and continue to hold the trigger handle for a ____ seconds
Few
59
Inspect air filter, hose couplings, dust caps, starter pull cord & condition of the fuel are _______ checks
Monthly
60
Fluid check, on/off switch, choke and fuel valve are ______ checks
Daily
61
Oil checks, fasteners, run for ___ min are ______ checks
15 Weekly
62
Holmatro Rescue Tool Cutters - This can be done by hand and if found to be loose, needs to be tightened to ___ foot pounds of torque
75
63
all nicks and metal build up known, as "mushrooming" should be dressed with a _____ so that blades pass each other without any deflection
File
64
Any blade showing evidence of _________ shall immediately be taken out of service and arrangements made to have the blade(s) replaced
Cracking
65
If the coupler doesn't make a full connection, apply _______ or an equally suitable lubricant to the area behind the coupler and also to the face
WD40
66
During the tool operation check, hold the trigger handle to the full open or closed position for about ______ seconds and check for leaks along the hose and the couplers
5-10
67
The hoses should be cleaned with a __________ and warm water solution
mild soap
68
If hoses become contaminated with grease, tar, battery acid or any other harmful product, a wiping cloth dampened with ______ can be used to remove such products
WD40
69
Additionally, hoses should be stored in a coiled roll and not shoved into the ______ of the spreader or cutter
handle
70
On a _______ basis all accessories such as the HRS22 Ram Support, cutting tips, chain shackles and chains shall be inspected for cracks, wear or any other damage that could possibly cause the part to fail during an operation
monthly
71
Current LAFD policy is to replace fuel in small motors every ___ days with fresh fuel
30
72
If there is no strainer present, the use of a ______ strainer will suffice.
paint
73
The The ram extends from the end _________ the handle
Nearest

AO Study Program Carlos Cativo (154 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions