Standards Flashcards
Roll out on desired heading +/- ____
VRF flight maneuvers
+/-
10 degrees
Stop climb/descent at desired altitude +/- ___
VRF flight maneuvers
+/-
100 ft
If PIO/PAO is experienced in turbulent conditions rapidly ____
Increase/decrease collective (as sit. dictates) until oscillations stop
Maintain heading +/- ____
+/-
10 degrees
HOVER
Maintain altitude ____ ft or as appropriate +/- ____ ft IGE / +/- ____ft OGE
3 ft
+/- 1 ft IGE
+/- 5 ft OGE
HOVER
Do note allow drift to exceed ____ ft
( ____ ft for hover OGE)
2 ft
10 ft hover OGE
In flight
Maintain altitude +/- ____
100 ft
In Flight
Maintain airspeed +/- ____ KIAS
10 KIAS
In Flight
Maintain rate of climb or descent +/- ____ FPM
100 FPM
in flight
Maintain the aircraft in trim +/- ____ ball width
1/2 ball width
On the PPC the values must be within:
Weight +/- ____ kg+lbs
Fuel flow +/- ____ lbs/hour
Airspeed +/- ____ kts
Torque values +/- ____ %
Weight +/- 22 kg / 50 lbs
Fuel flow +/- 50 lbs/hour
Airspeed +/- 5 kts
Torque values +/- 2%
The PPC has to be recomputed or arrival data computed if conditions have increased:
____ degrees celsius
____ feet PA
____ Gross weight (kg/lbs)
5 degrees celsius
500 feet PA
91/200 Gross weight (kg/lbs)
In flight fuel consumption check:
within ____ after leveling off or
____ after entering mission profile.
Compute fuel consumption rate +/- ____ and complete fuel check within ___ & __ after initial readings.
The aircraft should be in a ____
10 min after leveloff or entering mission profile
consumption rate +/- 50 lbs/hour, 15-30 min after initial readings
The aircraft should be in a level flight attitude
Planning VFR flight - standards for each leg
Distance +/- ____ NM
Ground speed +/- ____ kts
ETE +/- ____ min
Magnetic heading +/- ____ º
Fuel must be within +/-____ lbs
Distance +/- 1 NM
Ground speed +/- 5 kts
ETE +/- 1 min
Magnetic heading +/- 5 º
Fuel +/- 100 lbs
