Cab Unattended Procedures Flashcards
When must drivers perform cab unattended procedures?
- Changing ends
- Assisting special needs passengers
- Leaving the cab for any reason
What must a driver ensure when performing cab unattended?
The train must be secured to prevent unintended movement or unauthorized entry
What is the FULL cab unattended procedure for Xtrap?
-PA (if necessary)
MC in COAST
-EMY brake applied status light & BC pressure at EMY (210)
-reverser in NEUTRAL
- marker lights to WHITE (unless Red is req’d)
- take controller all keys, portable radio
- lock cab door & windows
On RETURNING:
- reset trip
- marker lights to AUTO
- radio back in
- check TDN is transferred in fixed radio
What is the changing ends procedure (cutting out)?
- MC to COAST
- ensure EMY brake applied status ind. light is on.
- note holding brake pressure increases to EMY brake pressure (cyl)
- RAISE trip
- marker lights to AUTO, saloon lights on, headlights off.
- switch off unnecessary equipment
- reverser NEUTRAL take controller key
- windows/ doors, blinds closed
Check rear: markers RED no headlights
Check cab & all doors are locked
Check along train for obvious defects
Check centre motors secure
Check pantos
Check lights on in all carriages
Check front for correct headboard & marker lights
Modified cab unattended procedure
All the same as full cab except the only thing that is different is
You don’t take DTRS or lock doors
Where must a special needs passenger be waiting if they wish to be assisted ?
Waiting at 3 or 6 car mark
- Unless an allocated space is not available
- to ensure access to unique facilities
*to ensure passenger can board AND alight the train.
How can a driver ensure passengers with special needs can reach their destination in times of disruption?
Driver will advise Metrol if any passengers will require further assistance
When at a terminal location and detraining special needs passengers, how can a driver ensure relief driver doesn’t move the train before passenger exits the train ?
Driver push in the EMY stop button, then reset when finished
What is cab unattended procedure for assisting passengers with special needs?
- release doors on plat side
- marker lights to WHITE
- master controller in COAST
- reverser NEUTRAL
- train radio volume up high
- Remove Controller key
- exit cab to platform get ramp out etc.
- define location of exit w passenger
- return ramp
- return to cab insert key
- reminder post it note with exit location
- marker lights AUTO
- reverser FORWARD
- close doors
- DEPART when safe