SECNAV M-5510.36, Ch. 10, DON NAV INFO SEC PROG

Question 1

What establishes and publishes minimum standards, specifications, and supply schedules for containers, vault doors, modular vaults, and associated security devices suitable for the storage and destruction of
classified information?

Answer 1

General Services Administration (GSA)

Question 2

What reference promulgates national policy for procuring and using security containers for Information Technology (IT) system purposes?

Answer 2

CNSSP No. 10

Question 3

Store Top Secret information in a vault, modular vault or secure room, equipped with an IDS and a personnel response to the alarm within 15 minutes of the alarm annunciation if the area is covered by Security-in-Depth, or a how many-minute alarm response if it is not?

Answer 3

5

Question 4

What reference governs the requirements for storing classified ordnance items too large to store in GSA-
approved containers?

Answer 4

OPNAVINST 5530.13C

Question 5

If new security storage equipment is needed, procure it from the what?

Answer 5

GSA Federal Supply Schedule

Question 6

Only what containers are on the current GSA schedule?

Answer 6

Class 5 and 6

Question 7

GSA approved containers manufactured before when are identified by GSA label that has either black

lettering on a silver background, or silver on black?

Answer 7

October 1990

Question 8

What GSA approved containers have a silver label with green lettering?

Answer 8

Class 7

Question 9

What containers are GSA-approved security containers for protection of IT systems?

Answer 9

Information Processing System (IPS)

Question 10

GSA approved Class 5 containers provide the same protection as Class 6 plus how many minutes
against forced entry attack?

Answer 10

Ten

Question 11

What GSA approved containers are typically used for storage of classified information such as documents,maps, drawings, and plans?

Answer 11

Class 6

Question 12

Security containers manufactured by what must be removed from service and disposed of under accepted safety standards?

Answer 12

Remington Rand

Question 13

Two and four-drawer Class 5 security containers manufactured by what are no longer approved for the
storage of classified information?

Answer 13

Art Metal Products, Inc.

Question 14

New purchases of combination locks shall conform to what Federal Specification?

Answer 14

FF-L-2740

Question 15

Built-in combination locks will then be reset to what standard combination when taken out of service?

Answer 15

50-25-50

Question 16

Combination padlocks will be reset to what standard combination when taken out of service?

Answer 16

10-20-30

Question 17

Title 18, U.S.C., Section 1386 makes unauthorized possession of keys, key blanks, keyways, or locks
adopted by any part of the DoD for use in the protection of conventional arms, ammunition or explosives (AA&E), special weapons, and classified equipment a criminal offense punishable by fine or imprisonment up to how many years, or both?

Answer 17

10

Question 18

What reference governs key security and lock control used to protect classified information?

Answer 18

OPNAVINST 5530.14C

Question 19

When securing security containers, rotate the dial of mechanical combination locks at least how many
complete turns in the same direction, and check each drawer?

Answer 19

Four

Question 20

Neutralization of lock-outs, repairs and maintenance of GSA-Approved security containers shall be accomplished in accordance with what?

Answer 20

Federal Standard 809

Question 21

What consists of monitors and electronic sensors designed to detect, not prevent, an attempted
intrusion?

Answer 21

IDS

Question 22

What system is designed to assess, view areas, or detect an intrusion?

Answer 22

CCTV

Question 23

What components consist of card reader devices and/or biometrics, such as hand geometry, iris or
fingerprint scanners, and the computers to control them?

Answer 23

ACS

Question 24

What provides additional protective controls at vital areas in the event of human or mechanical failure?

Answer 24

ESS

Question 25

Destroy classified information no longer required for operational purposes per what reference?

Answer 25

SECNAV M-5210.1

Question 26

Refer to what reference for IT storage media destruction techniques?

Answer 26

DON IA Pub P-5239-26

Question 27

Who provides technical guidance concerning appropriate methods, equipment, and standards for the destruction of classified electronic media and processing equipment components?

Answer 27

Directorate for Information Systems Security, NSA

Question 28

A cross-cut shredder shall reduce the information to shreds no greater than how many square millimeters?

Answer 28

Five

Question 29

Crosscut shredders purchased prior to 1 January 2003 which reduce the information to shreds no greater than 3/64 inch wide by 1/2 inch long may continue to be used until when?

Answer 29

October 2008

Question 30

Pulping (wet process) devices with a what size or smaller security screen may be used to destroy classified water-soluble material?

Answer 30

1/4 inch

Question 31

What may be used to store classified material awaiting destruction at a central destruction facility?

Answer 31

Burn bag

Question 32

A record of destruction is required for Top Secret information. What form, "Classified Material Destruction Report”?

Answer 32

OPNAV 5511/12

Question 33

Retain Top Secret records of destruction for how many years?

Answer 33

Five

Question 34

Destroy record copies of FOUO, SBU, DoD UCNI, DOE UCNI, and unclassified technical documents assigned Distribution Statements B through X, per what reference?

Answer 34

SECNAV M-5210.1

Question 35

Commanding officers shall ensure that the release of classified information in connection with the transfer to a friendly foreign government is processed per what reference, and that the permission of the Archivist of the U.S. is obtained before transferring records to other agencies or non-U.S. Government organizations, including foreign governments?

Answer 35

SECNAVINST 5510.34A