IT 242 UOP Assignment, IT 242 UOP Entire Assignments, IT 242 UOP Entire Class, IT 242 UOP Week Assignments, IT 242 UOP Tutorials Flashcards
IT 242 Week 9 Final Project WAN Design
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-9-Final-Project-WAN-Design
IT 242 Week 9 Final Project WAN Design
Read Appendix A.
Develop a plan to set up a WAN based on the scenario in Appendix A. Your plan must include the following:
An overview of the company and its needs
A logical network drawing for Acme to depict the recommended WAN
Recommendations for the type of leased lines the company must choose at each location, how each location connects to headquarters, and whether or not each location must be able to connect with the others
Recommendations for what type of telecommunications system would work best for Acme, PBX or VoIP
The IP address scheme, including the range of IP addresses, broadcast addresses, and subnets
A VLAN to appropriately address Acme’s concerns that departments that are not grouped together are logically connected
Recommendations for network equipment that must be placed at each location; also, consider equipment based on teleconferencing needs
Protocols used for the routers at each location
Recommendations for wireless technology
Recommendations for securing the network
Create a 700- to 1,050-word network design document addressing each of Acme’s requirements with your recommendations.
Format consistent with APA guidelines.
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 9 Capstone DQ
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-9-Capstone-DQ
IT 242 Week 9 Capstone DQ
How has your perception of WAN technology changed as a result of what you have studied in this course?
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 8 Individual Assignment Wireless Signals
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-8-Individual-Assignment-Wireless-Signals
IT 242 Week 8 Individual Assignment Wireless Signals
Resource: Ch. 18 of Wide Area Networks
Discuss four different types of wireless technologies in a 350- to 700-word paper.
Describe the characteristics and properties of each signal type, and how each can be used.
Include a table or matrix that compares properties of the four types.
Provide a hypothetical situation for each signal type that illustrates how it could be, or is being, used in a WAN. In what circumstance, for example, would a company choose to use a satellite signal?
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 8 Check Point WLAN
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-8-Check-Point-WLAN
IT 242 Week 8 Check Point WLAN
Explain in 200 to 300 words at least two different ways to secure a wireless LAN (WLAN). What are the ramifications if a WLAN is breached?
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 7 DQ 2
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-7-DQ-2
IT 242 Week 7 DQ 2
What is a key? What are the differences between private key and public key encryption? Provide examples of each.
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 7 DQ 1
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-7-DQ-1
IT 242 Week 7 DQ 1
What are some of the greatest security risks to a WAN? Provide an example of one risk and discuss the potential consequences and possible precautions.
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 7 Check Point Firewalls
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-7-Check-Point-Firewalls
IT 242 Week 7 Check Point Firewalls
Explain the followings in 200 to 300 words:
Describe the three main types of firewalls.
Explain how each type protects a network.
Determine which firewall is the most efficient and why.
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 6 Individual Assignment Router And Switch Configuration
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-6-Individual-Assignment-Router-and-Switch-Configuration
IT 242 Week 6 Individual Assignment Router and Switch Configuration
IT 242 Week 6 Individual Router and Switch Configuration
Describe how to configure a switch and router in a 350– to 750–word paper in APA format. Be sure to include the following:
Basics of installing, setting up, and configuring a switch
o User interface console and the purpose of each menu item
o Configuring VLANs and spanning tree protocol
Basics of installing, setting up, and configuring a router
o The different comment modes of a router
o At least four routing protocols and the purpose of using these protocols
Post your paper as a Microsoft® Word attachment.
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 6 Exercise Toolwire® Lab
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-6-Exercise-Toolwire%C2%AE-Lab
IT 242 Week 6 Exercise Toolwire® Lab
Complete the following Toolwire® Labs:
Starting a Switch
Starting a Router
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 6 Check Point Static Or Dynamic
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-6-Check-Point-Static-or-Dynamic
IT 242 Week 6 Check Point Static or Dynamic
Consider the following scenario:
As a network administrator for a company, you want to configure an IP route between two routers. Of static and dynamic routing, which is more appropriate?
Explain your answer in 200 to 300 words
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 5 DQ 1
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-5-DQ-1
IT 242 Week 5 DQ 1
Identify the functions of a CSU and DSU. How are they used in a corporate environment?
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 5 Check Point Switching
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-5-Check-Point-Switching
IT 242 Week 5 Check Point Switching
Compare and contrast packet and circuit switching in 250 to 300 words. Which is more commonly used? What are the advantages and disadvantages of each?
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 4 Individual Assignment VLAN
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-4-Individual-Assignment–VLAN
IT 242 Week 4 Individual Assignment VLAN
Consider the following scenario:
Your company moves into a new building. Marketing is on the first floor, engineering is on the second floor, operations is on the third floor, and the call center is on the fourth floor. The LAN is organized neatly, with each floor having its own switch. Some groups on the floor are connected through hubs and the network is planned for orderly growth. The company grows faster and much differently than planned, however, and the call center must be expanded. Some engineering employees on the second floor and operations employees on the fourth floor move offsite and the call center expands. Space is compressed and users move to other parts of the building, but their communities of interest do not change. The same users still need to communicate with the same services.
Explain, in a 350- to 700-word plan, how a virtual LAN (VLAN) could be implemented so bandwidth is not consumed. Your plan must ensure that the network is not flooded with packets, and that members of the same VLAN can be located in different buildings or cities.
Include the following:
The benefit of creating a VLAN
A plan to segment the network into different broadcast domains to avoid bandwidth consumption
A plan to improve security
The type of VLAN membership and the value of that choice over other options
The type of switch to be used, layer 2 or layer 3, and why you would choose it over the other
The types of trunking configured on the switch
The purpose and benefit of using the VLAN trunk protocol (VTP)
A definition of the VTP mode used to configure the switches
Backup plan
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 4 Exercise Toolwire® Lab
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-4-Exercise-Toolwire%C2%AE-Lab
IT 242 Week 4 Exercise Toolwire® Lab
Complete the following Toolwire® Lab:
Designing for Network Connectivity
Complete the lab assignment as indicated.
For More Assignments Visit
http://www.assignmentmade.com
IT 242 Week 4 Check Point Ethernet Or Token Ring
To Download A+ Tutorials Click Below
http://www.assignmentmade.com/IT-242/IT-242-Week-4-Check-Point-Ethernet-or-Token-Ring
IT 242 Week 4 Check Point Ethernet or Token Ring
Consider the following scenarios:
Saguaro Federal has mainframes for all of its banks and businesses. Must the company use the Ethernet or Token Ring protocol? Explain your choice. Why is this choice appropriate?
XYZ Technology Consultants has offices on the second, third, and fourth floors of the office building it occupies. Must the company use the Ethernet or Token Ring protocol? Explain your choice. Why is this choice appropriate?
Explain your answers to the two scenarios in a total of 200 to 300 words. Each your responses must include a description of the main features of the protocol you selected.
For More Assignments Visit
http://www.assignmentmade.com
