ATP MANUAL DRIVING

Question 1

What does a TARGET SPEED INDICATOR identify?

Answer 1

The maximum speed permitted for the section of the track

Question 2

How long should you wait when stationary before changing driving mode?

Answer 2

5 seconds

Question 3

How does a TSI function?

Answer 3

Once received RTD, TSI will beep and move to identify speed for that section of the track

Question 4

When will the warble sounds in relation to TSI?

Answer 4

When your speed is within 3kph of TSI

Question 5

What speed should you aim to do in relation to TSI?

Answer 5

5kph below TSI

Question 6

At what speed will EBs apply in relation to TSI?

Answer 6

3kph above TSI

Question 7

What happens if you don’t respond quickly to warble sound?

Answer 7

1. EBS WILL APPLY

Question 8

If you cannot reset after INHIBIT has been applied on your train in relation to TSI, what should you do next?

Answer 8

1. Wait 60 seconds
2. Contact CCC

Question 9

If you stop short in AUTO, what are you allowed to do next? Describe also, how you would dock correctly?

Answer 9

Without CCC permission you have permission to dock correctly by selection ATP MANUAL

1. Select ATP MANUAL
2. Move forward and dock correctly
3. Docked lamp will illuminated
4. Enable doors platform side
5. Re-request AUTO

Question 10

DESCRIBE OUT OF SERVICE PROCEDURE IN ATP MANUAL

Answer 10

1. Make an OUT OF SERVICE ANNOUNCEMENT AT PENULTIMATE STATION
2. Dock correctly and service station and make another announcement at TERMINAL STATION
3. REQUEST AUTO
4. ONCE AUTO IS GRANTED, REMOVE KEYS
5. GO TO NEAREST DCP AND PLACE INHIBT
6. WALK ALONG THE PLATFORM TO THE FURTHEST DOORS FROM ENTRANCE
7. CARRY OUT DOOR PROCEDURE FROM FURTHEST ENTRANCE, APPLY INHIBIT WHEN ADC IS LIT
8. WALK TO EDP FURTHEST FROM THE ENTRANCE
9. ENSURE ALL CUSTOMERS HAVE LEFT THE TRAIN
10. LET CUSTOMERS OUT THROUGH CREW ACCESS DOOR
11. DO SECURITY CHECKS AND CHECK FOR LOST PROPERTY
12. ONCE AT LEADING EDP, RE-REQUEST ATP MANUAL AND DEPART ON INDICATIONS