Voice Edge Select (PJ 10-29-18)(IS 2018) Flashcards
How many seats can be used with BVE Select?
3-8
What is the Maximum number of phone numbers on a BVES account?
9 :: 8 seats and 1 Automated Attendant
What type of hunt group is provided on VoiceEdge Select?
Sequential
Number of base stations per site
1
Number of repeaters allowed per site
3
How many concurrent calls can the DECT Repeater handle?
4
What does it mean if the Base Station indicator stops at a solid Orange light during initial power up?
The Base Station has failed to obtain the IP address
If the Base Station stays indicator turns flashing orange after all phones are paired what does that indicate?
The Base Station has failed to register all of the phones with the Comcast IMS network
BVES is based on
BUSINESS VOICE MOBILITY
BVES consists of Voice mobility features plus
Handsets, Automated Attendant, Hunt Group, Voicemail included per seat, and enhanced portal management
How many handset choices?
2
Make and model of the Handheld handset
Panasonic KX-TPA60
Make and model of the desktop handset
Panasonic KT-TPA65
How much bandwidth will this product consume from customers internet?
None - dedicated bandwidth via a separate modem
How many Hunt groups does IMS support per account?
4
Is VES HD Voice?
yes (BVE and VES have checkmark on cafe)
What is the KX-TGP600?
Cordless phone Base Station
How many cordless phones can be installed per base?
8
Approximate range of the Cordless Phone Base Station?
100-150 feet
What is the KX-A406
DECT Repeater used for increased Cordless range
What type of modem is used for VES?
Arris CM820
What height should the DECT Base Station be mounted for optimal signal coverage?
7 to 8 feet
DECT must be installed _______ as the antennas are oriented to spread signal on a horizontal plane radiating from the front and back of the unit.
Vertically
What types of walls should not be used to mount the DECT Base Station?
Concrete, steel reinforced concrete, plaster over expanded metal lath, steel or metal paneling, tile, stained glass
DECT Base Station should not be installed near sources of
RF SIGNALS, and sources of EMI OR RFI
How is the Primary Service Manager (PM) designated?
The first person that signs on to the My Account portal becomes the PM by default.
What is the voltage output for the KX-TPA60 (hand set) power pack?
5.5v
What is the power pack output voltage for all VES devices except the handset?
6.5v
How long does it take to receive the CPNI PIN after activation of the modem?
Expected wait time is less than 60 seconds Longest wait time is approximately 10 minutes
Acronym IPEI
International Portable Equipment Identity
is the DECT specific hardware identifier.
IPEI Pronounced: (eye-pie)
