TB 12 - Automatic Sprinkler System Flashcards
The what is by far the most important of all the fire protection devices per NFPA?
Automatic sprinkler
Early detection of fire and effective application of the available what supply are fundamental to minimizing most fire losses?
Water
Records show that what percentage of all fires in sprinklers building are extinguished or satisfactorily held in check by the sprinkler system?
96%
NFBU bulletin No. 270 suggest that one of the first fire alarm engine companies responding should lay 2 of what size lines into the fire department connection?
2 1/2”
Pump operators should deliver what psi to the sprinkler system if nothing showing and when fires showing?
100 psi nothing showing
150 psi fire showing
Normally what size hoseline would be sufficient in sprinklered buildings?
1 1/2”
In order to properly utilize the potential of sprinklers in the area, it is suggested that companies maintain a list of sprinklered buildings in their district, the info can be obtained from what form which are filed behind what forms in the company files?
F-316s filed behind F-173s
Extreme what must be exercised by officers when ordering systems turned off after a fire?
Caution
Who must remain at the control valve so that it can be reopened without delay if needed and until system is put back into service?
The fireman ordered to close the control valve
Sprinklers delivering water directly over the seat of the fire generally use far less water while doing a better job of cooling and extinguishing than what?
Hose lines
Intense what may even prevent hose men from reaching the fire at all?
Heat
Junior systems are designed to provide simple, inexpensive protection for light hazard occupancies where not over how many sprinklers are likely to operate?
3 or 4 sprinklers
The junior system is connected directly to the service water supply through a what size brass pipe and electric water flow alarm?
1”
Is there a fire department connection and drain valve in a junior system?
No
The junior system itself is a loop of what size copper tubing?
3/4” or 1”