Task Sharing

Question 1

When can you consider positive climb ?

Answer 1

• RA > 0
• V/S indicate climb

Question 2

What is the purpose for wing light ?

Answer 2

For night walkaround and ice inspection

Question 3

What to be kept in mind before set all ADIRS off ?

Answer 3

Be sure all slats/flaps are retracted in order to avoid damage RTLU mechanical stop

Rudder Travel Limit Unit

FCOM/ABN/NAV/ADR 1+2+3 fault

Question 4

When will you obtain ATC departure clearance ?

Answer 4

5 min before pushback/start

Question 5

CEO

When will you turn on engine bleed after start ?

Answer 5

10s after APU bleed off

Question 6

One engine taxi out

When will you perform FLT CTL check ?

Answer 6

After start both engine

Question 7

With standard T/O procedure, when will you turn Packs on ? and How ?

Answer 7

Packs on at thrust reduction alt
Wait at least 10s btw Pack 1 ON and Pack 2 ON

Question 8

After T/O, when can you switch radio frequency

Answer 8

Abv 400ft

Question 9

For landing, when will you use take off light ?

Answer 9

night time only

Question 10

RNAV/RNP approach

What is accuracy requirement ?

Answer 10

1.0 before IAF
0.3 before FAF

Question 11

When will you pull FPA selector during approach ?

Answer 11

0.3nm before FAF

Question 12

When will you arm APPR during RNAV approach ?

Answer 12

TO waypoint is FDP

Question 13

What range should be used on ND during approach ?

Answer 13

10nm

Question 14

RNAV/RNP approach

When should you discontinue approach ?

Answer 14

• GPS primary lost on both ND
• NAV accuracy downgrade
• NAV FM/GPS POS DISAGREE
• XTRK > 0.3
• VDEV > 3/4
• Loss of minimum required equipment

Question 15

Announce any deviation in excess of

Answer 15

V/S: 1000ft/min
IAS: Speed target +10/-5kt
Pitch: 2.5 nose down, 7.5 nose up
Bank: 7

Question 16

RNAV/RNP approach

If NAV accuracy lost, how do you perform GA ?

Answer 16

Perform GA by RAW DATA or radar vector

Selected not manage

Question 17

RNAV/RNP approach

What should be check before FAF ?

Answer 17

Altimeter setting, max diff btw 2 PFD is 100ft

Question 18

After landing, when will you turn on brake fan ?

Answer 18

• Turn on imediately if brake temp > 500℃
• If not, delay 5 min or to the gate whichever is first

Question 19

CEO

At parking, when will you turn on APU bleed ?

Answer 19

10s after both engines shut down

Question 20

At parking, after engine shut down

When will you turn off Beacon light ?

Answer 20

N2 < 20%

Question 21

How to avoid odors when turn on APU bleed ?

Answer 21

wait 3 min after APU start