SOP# 26: Power Saw Operations Flashcards
Who shall train members under in the safe and proper use of all saws assigned to the company?
Company officer
Who shall be allowed to use a saw at an emergency incident?
Only those members who have received proper instruction and demonstrate aptitude for using a power saw
What shall be worn by all members operating a saw, as well as those members in close proximity (20 foot danger circle)?
full protective ensemble
with hearing and vision protection
When operating a power saw, all clothing shall be?
close fitting and completely buttoned
prevent accident from moving belts, gears, chains or blades
portables radios shall be secured
What shall Company officers incorporate into their periodic training with power saw?
Theory on operations
Various cutting situations
Saw being operated other than horizontal
Who shall be notified anytime a power saw is being used on the foreground and what information shall be provided?
Incident command
Floor sector and quadrant
How team of __ ff should perform cutting operations?
2
The ff operating the saw
The second ff is the guide
The area that should ne maintained between the operating and members not involved in the cut is ?
20 foot danger circle
Before putting the saw into operation, the plan should include?
Location and sequence of cuts and openings
Wind direction. Consider effect of the saw, exposure, and personnel
2 Means of egress
What can be done to avoid cutting gas or electrical lines?
Terminate services early
In suspected flammable or explosive atmospheres, saw should?
not be operated
What could be used to shield combustible /flammable material as well as cover victims during saw operations?
Salvage covers
What should you make sure of before operating the saw?
footing
Do not overextend or reach forward
When are power saw operations safest?
Horizontal surfaces near ground level
Vertical surfaces near the waist
What should be done whenever a saw is used on other than flat horizontal surfaces at foot level?
blade and chain guard should be adjusted and secured to protect the operator
Because operating a power saw above chest height is extremely hazardous, it shall only be used?
under the direct supervision of a company officer
not a normal course of action
What must be done when the operator is not actively cutting?
Safety Brake must be applied
What must be done with power saws are unattended or need to be moved to a distant area for operation?
Shut it down
What shall power saws be equipped with?
Strap/Safety Harness
What shall be removed prior to beginning the cutting operation?
Carrying strap/safety Harness
How shall power saws be carried?
engine stopped
power disconnected
muffler away from body
Rescue saws with blade frontward
chainsaws with guide bar and chain to the rear
What should be done for operations with power saws on sharply pitched roofs?
Saw should be started on the ground
brake applied.
Do not transport if brake does not work
T or F: It is recommended to use power saws from ground ladders
False: if there are alternatives use them
Where should the guide be positioned?
to the rear and in physical contact with the operator
How will communications be done when operating a power saw?
Slaps
1 slap = stop
2 slaps = go
3 slaps = stop saw
When shall members inspect power saw carried on apparatus?
beginning of each shit
after each use
What distance is to be maintained between the work area and refueling area?
10 Feet
What are some safety regulations when necessary to refuel?
never refuel while engine is running
if spilled wipe before starting
fuel leak, remove from service
small enclosed space after refueling, do not restart