Q-AVIONICS Flashcards
What is an indication of an ADC failure ?
IAS and ALT failure
During normal operations, which fight instruments recieve infromation directly from the ADC ?
Airspeed and VS
What action should be taken if an ADC fails ?
EFIS switch to operable side
where are FD modes displayed ?
PFD top right corner ( primary flight display )
What modes do the GA button give you ?
Disengage AP , FD , 10 Degrees pitch up and wings level.
What are the basic lateral flight director modes ?
HDG, NAV AND STBY
What does roll hold provide you with ?
From 6-45 degrees roll the AP will hold the bank until angle until a new lateral mode is selected.
How do you disengage the autopilot ?
Push the AP , push GA , YD off.
Will TCS ( Tactile Control Steering ) disengage the auto pilot ?
Only Temporarily provides higher authority over the servos while the button is pressed
What is required to enter DUAL FD mode ?
Two ILS signals compared to ensure accuracy.
What is the maximum Flap setting for a coupled ILS approaches ?
15 FLAPS
May the Autopilot be used in severe icing conditions or in sever turbulence ?
NO
Is it possible to be engaged in IAS and VS mode at the same time ?
NO
What is an indication of an ADC ?
Crosses on the ALT and IAS
What are the reduced modes for the AHRS ?
BASIC AND DG
What is the basic mode of the AHRS ?
Basic has no correction for acceleration ( conventional A-I )
What does the static ISOL switch do ?
Isolates static information between respective ADC
Where is the RAD ALT displayed ?
Under the Airspeed Indicator
What is the auto screen reversion ?
ED failure
How many airspeed bugs can be set for takeoff ?
5
What is the difference between HDG HOLD and HDG SEL ?
HDG HOLD - rolls wings level
HDG SEL - ac turns to whichever bug heading is selected
WHAT ARE THE STANDARD OPERATING MODES FOR THE AHARS ?
NORMAL
SLAVE
ALIGNED
test
test
