GENERAL OPERATING POLICIES

Question 1

When can we use an abbreviated callsign?

Answer 1

Only when it has been used by ATC and only until the next frequency change

Question 2

What do we have to report to ATC on first contact?

Answer 2

Cleared flight level/altitude

Question 3

When does headsets need to be worn?

Answer 3

Up to top of climb and from top of descent

Question 4

When should logon to CPDLC be done at the latest?

Answer 4

15 min before relevant FIR boundry

Question 5

When do we have to do CPDLC position reports?

Answer 5

At all FIR boundries

Question 6

Which autopilot should the First Officer use when he/she is the PF?

Answer 6

AP2
AP1 can be used in case of malfunction

Question 7

When should autopilot be disconnected if you are planning on a manual thrust approach?

Answer 7

Before 1000 ft AAL

Question 8

Can we operate with one FD on?

Answer 8

No both has to be on or both has to be off

Question 9

Where should the altitude knob selector be set when not in use?

Answer 9

To the “1000” position

Question 10

When does the engine cooling timing period start when using idle reverse vs max reverse?

Answer 10

Idel reverse, it starts when thrust levers are retarded during flare

Max reverse, it starts when levers are set to idle after landing roll