TOOLS 28 - LOBSTER TOOL Flashcards
LOBSTER TOOL
DESCRIPTION
It can also be used to cut wrought iron fences up to _______ in diameter. It is not to be used to cut __________ or ________.
5/8”
CASE HARDENED STEEL RODS OR LOCKS.
It can also be used to cut wrought iron fences up to 5/8” in diameter. It is not to be used to cut case hardened steel rods or locks.
LOBSTER TOOL
DESCRIPTION
What units carry the lobster tool or cordless rebar cutter?
Ladders
Squads
Rescues
LOBSTER TOOL
EMERGENCY MANUAL RELEASE
How do you operate the emergency manual release?
After releasing the trigger switch, slightly loosen the release valve button.
The hydraulic oil will be discharged and the movable blade will return to its starting position.
Tighten the release valve to prepare the tool for the next operation.
LOBSTER TOOL
SAFETY
TRUE/FALSE
Do not operate this tool in a explosive atmosphere.
TRUE
DO NOT operate this tool in an explosive atmosphere, e.g. flammable liquids, gases or dusts. This tool creates sparks, which may ignite the dust or fumes.
LOBSTER TOOL
TECHNICAL DATA
What is the voltage that lobster tool works on?
12 volts
LOBSTER TOOL
TECHNICAL DATA
How much time does the quick charge require?
20 minutes
LOBSTER TOOL
TECHNICAL DATA
Below 32 degrees F, this tool _________ work well.
Below 32 degrees F, this tool WILL NOT work well.
- warm up prior to use by storing in heated area or using the trigger lock to run the tool for 5 mins without any load.
LOBSTER TOOL
TECHNICAL DATA
The tool is equipped with a swivel head that has a _________ degree turning angle to make it more convenient for the operator.
180 DEGREE
The tool is equipped with a swivel head that has a 180-degree turning angle to make it more convenient for the operator.
LOBSTER TOOL
TECHNICAL DATA
When the battery is low, what will happen?
- The battery capacity indicator is composed of five pilot lamps.
- When the battery is low, the pilot lamp display will flash to alert the operator that the remaining battery capacity is less than 20 percent.
LOBSTER TOOL
TECHNICAL DATA
A fully charged battery will last for aprx. _______ cuts.
40
A fully charged battery will last for aprx. 40 cuts.
LOBSTER TOOL
TECHNICAL DATA
Hydraulic oil should be changed every _______ months. Units shall do this on ___________ of each year.
6 MONTHS
JANUARY 1st and JULY 1st.
tool room supplies hydraulic oil for lobster tool
LOBSTER TOOL
TECHNICAL DATA
When are the batteries check on the lobster tool?
At the start of each tour.
LOBSTER TOOL
TECHNICAL DATA
In the event the lobster tool becomes inoperable, the company should contact ____________.
In the event the tool becomes inoperable, the company officer shall contact Technical Services. Technical Services maintains loaner tools that will be deliver to the company when picking up the out of service tool.
