3.3 Installing Storage Devices Flashcards
What are the two main types of storage devices commonly installed in modern computers?
M.2 SSDs and SATA hard drives.
What is the first step in preparing to install an M.2 SSD?
Identify the M.2 slot on the motherboard and remove the retaining screw.
At what angle should you insert an M.2 SSD into its slot?
At a 45-degree angle.
How do you secure an M.2 SSD after inserting it into the slot?
Use the retaining screw to secure it flat against the motherboard.
What should you do if a component obstructs access to the M.2 slot?
Temporarily remove the obstructing component (e.g., graphics card).
What cables are required to connect a SATA hard drive?
A 15-pin power cable and a 7-pin SATA data cable.
How should you align a SATA hard drive in its bay?
Place it into the bay, align the retaining pins, and secure with screws.
Why is cable management important when installing storage devices?
It improves airflow, reduces clutter, and makes future upgrades easier.
What tool can help secure tiny connectors like case-to-motherboard pins?
Tweezers.
Where can you find the pinout configuration for case-to-motherboard connections?
In the motherboard manual, often labeled as JFP-1.
What is the purpose of cable ties during storage installation?
To bundle and route cables neatly for better airflow and organization.
What are common headers connected from the case to the motherboard?
Audio, USB, power LED, reset switch, and power switch headers.
What should you do after connecting storage devices and other components?
Double-check all connections for security and confirm no cables obstruct moving parts.
What are the final steps after connecting all storage devices?
Close the case and power on the system to verify the installation.
What troubleshooting step should you take if access to connectors is limited?
Remove or reposition components like the graphics card temporarily.
