Shutdown Checklist

Question 1

When can the shutdown checklist be performed?

Answer 1

When at the gate and either APU or GPU AC power had been established and both engines have been shutdown

Question 2

If on a through flight, quick turn or crew change the aircraft________ and the __________

checklist meed not be completed.

Answer 2

• may remain powered
• Leaving the airplane

Question 3

What should the flight crew do if the aircraft is to be unattended or an extended ground period is expected with regards to leaving the aircraft powered?

Answer 3

Complete the leaving the aircraft checklist

Question 4

What is the recommeded procedure to avoid power interuptions when shutting down one engine (while both are running) and transferring to APU/GPU AC power?

Answer 4

Wait 10 secs after selecting the GPU or APU before shutting down an engine. If one engine is already shutdown, wait 10 secs until the running IDG has stablized before starting the APU

Question 5

If oprerational requirements dictate that engine #1 be shutdown first, while taxing, what procedure must be followed with regards to the hydraulic system?

Answer 5

Hydraulic pump 1A turned on

(QRH procedure)

Question 6

While a single engine taxi on #2 is allowed what special checklist/procedure must be referenced?

Answer 6

QRH

Question 7

What conditions would require the necessity to perform a single engine turn?

Answer 7

Inoperative APU and unavailable or INOP ground equipment

Question 8

Single engine turns exceeding 30 min on the ground must be coordinated with whom?

Answer 8

dispatcher

Question 9

What side of the aircraft will be serviced during a single engine turn?

Answer 9

The side of the non running engine

Question 10

What hydraulic pumps must be switched on to ensure brake operation during a single engine turn?

Answer 10

Hydraulic pumps 1 and 2

Question 11

During a single engine turn what method of refueling is permitted?

Answer 11

Single point

Question 12

Where must the captain remain and who must be advised that a single engine refueling is taking place?

Answer 12

• Flight deck
• Flight crew
• ground crew

Question 13

Who may be on board when the aircraft while single engine refueling is taking place?

Answer 13

• Captain
• FO
• F/As

Question 14

Why must the MCD remain open during single engine refueling operations?

Answer 14

To facilitate emergency evacuation of the crew

Question 15

Which engine must be running to conduct single engine refueling operations?

Answer 15

Engine 1

Question 16

Briefly describe the gate area procedure for deplaning, refueling, unloading/loading baggage and boarding the aircraft on a single engine turn?

Answer 16

Crossbleed start Engine 1. shutdown engine 2, inform ramp that fueling AND baggage can be uploaded /loaded , after fueling and baggage loads are complete, crossbleed start Engine 2, shutdown Engine 2

Question 17

Why, when practical, should PACK 2 not be used during single engine refueling operations?

Answer 17

PACK 2 will blow hot air the heat exchangers towards refueling personnel