Before Start Checklist to the line

Question 1

When is the before start check to the line performed?

Answer 1

After refueling and ATC clearance

Question 2

What is the minimum amount of time that must be observed prior to running the CA’s before start check (to the line) flow?

Answer 2

At least three minutes after AC power is established

Question 3

When setting the PERF INIT pages, what should be done if the flight is dispatched with a Cost Index number?

Answer 3

Enter the cost index number on the ACARS ECON SPEED page

Question 4

When entering the fuel in the PERF INIT pages, what should not be done to the contigency fuel?

Answer 4

Do NOT add fuel to the contigency

Question 5

When checking the MFD/Status page, what items must be green?

Answer 5

BRAKES EMER ACCUM SYS 1 and 2, engine oil level

Question 6

What are the recommended delegation of duties for takeoff performance programming? (table on SOPM 4-3.9)

Answer 6

Ca: Verify loading, select PERF INIT, enters ZFW, select T/O DATA, enter V speeds, Select Perf T/O, verify correct setting per runaway data, T/O Mode (T/O-1, or-2), T/O Temp (from ATIS), ATTCS as required (always ON), REF ECS (on/off), FLEX T/O (on/off), FLEX T/O temp (from performance data), select auto brakes RTO or OFF per ACARS/TLR data

Question 7

How is the use of autobrake determined?

Answer 7

According to takeoff performance (ACARS/Release)