LVOP

Question 1

What is the indication to stop at a stop bar?

Answer 1

Red stop bar lights

Question 2

At what point in the rwy to lights become red and white?

Answer 2

Last 900m

Question 3

When do the rwy lights become solid red?

Answer 3

Last 300m

Question 4

What is the max time that a TO div can be from dep airfield?

Answer 4

60 mins for twin (Unless ETOPS flight then 2 hrs)

Question 5

What can be used for confirmation of correct rwy on lineup?

Answer 5

• runway identifier sign
• runway markings
• localizer alignment

Question 6

What is Cat II min?

Answer 6

100ft

Question 7

What app requires an alert height?

Answer 7

Cat III
With no DH

Question 8

What number of app lights can be used as a visual reference?

Answer 8

3

Question 9

What extra feature is required for visual reference in addition to min number of lights?

Answer 9

A Lateral element (like an app light cross bar)

Question 10

When would you not go round on a CAT III app if the required vis references are lost?

Answer 10

After touchdown.

Question 11

What does fail passive provide in the event of system failure?

Answer 11

There is no significant deviation from the required flight path.

Question 12

When is a fail operational system required?

Answer 12

On CAT III approaches with no Decision Height or whenever the DH is less than 50 ft

Question 13

At 10 kts GS, how far ahead can you see in 150m vis?

Answer 13

30 seconds

Question 14

What lights are called by CM2 on an autoland?

Answer 14

Red runway end lights “Red Lights”

Question 15

What RVRs are required?

Answer 15

TDZ and MID (all at EAT)

Question 16

When should CM2 check for the FMA ‘FLARE’ annunciation?

Answer 16

30ft

Question 17

When must LAND be indicated on the FMA?

Answer 17

By 350ft RA or mandatory GA

Question 18

When must the FLARE indication be on the FMA.

Answer 18

By 30 ft RA. Mandatory GA if not indicated.

Question 19

When should all ECAM actions be complete?

Answer 19

At 1000ft RA or mandatory GA.

Question 20

What will a single failure lead to in Cat 3 Single?

Answer 20

AP disconnect. Must be flown manually.

Question 21

What is indicated if the FD bars flash?

Answer 21

Transmitter fault

After 7 secs FD will revert to basic modes (HDG/VS)

Question 22

What is the A330 alert height?

Answer 22

200ft

Question 23

What is the formula to check if RVR is sufficient to see the runway at minima? (based on 3º app)

Answer 23

6 x minima (in feet) = required vis in metres