Ch15 Salvage, Overhaul, and Property Conservation Flashcards
What can firefighters do to minimize damage?
Protecting property requires that firefighters to practice good loss control techniques throughout an incident.
Describe overhaul…
Overhaul refers to all operations conducted after the main body of the fire has been extinguished and includes the following activities: searching for and extinguishing hidden or remaining fires, placing the building and contents in a safe condition, determining the cause of the fire, recognizing and preserving evidence of arson.
True or False.
Toxic gases that continue to be produced from a smouldering fire are a significant threat to firefighters during overhaul operations. Even if the air in a structure appears free of smoke, toxic products of combustion can exist in dangerous concentrations.
True
True or False.
Wear protective clothing including SCBA until overhaul is complete and you have exited the structure.
True
Firefighters can often detect hidden fires by sight, touch, sound or with a TIC….
Sight - Discoloration of materials, peeling paint, smoke emission from cracks, cracked plaster, rippled wall paper, and burned areas.
Touch - Heat felt through the walls.
Sound - Popping or cracking of fire burning, hissing of steam.
TIC - Heat signatures
To locate possible fire extension into the wall cavity, inspect openings such as…
Electrical receptacle Electrical switches Return air ducts Heating vents Telephone connections Cable connections
Overhaul typically begins with the area with the most severe fire involvement… p744
The IC and the lead fire investigator should coordinate when overhaul should begin. Looking for fire extension should begin as soon as possible after the IC gives the order.
When pulling any ceiling, do not stand directly under the area to be opened. Position yourself between the area being pulled and a doorway to keep the exit route from being blocked with falling debris… p745
Always wear full PPE including respiratory protection when pulling ceilings.
Investigators may want pictures of the furniture in place before it is moved for extinguishment. Scorched or partially burned items may help and investigator in determining the cause of the fire… p745
Firefighters need to work in close coordination with the fire investigator to ensure potential evidence is not disturbed.
Covering openings… p755
You should cover openings to prevent further damage to the property from weather and trespassers. Doors or windows that have been broken or removed during suppression activities should be covered with plywood, heavy plastic, or some hinges, a hasp, and a padlock can be used to make a temporary door. Opening in roofs should be covered with plywood, roofing paper, heavy plastic sheets, or tar paper. Covering openings cut in floors or upper stories or over basements and crawl spaces is very important. These openings must be covered with lumber or thick plywood that will support a person’s weight.
Permitting canvas salvage covers to dry when they are dirty is not a good practice because carbon and ash stains can rot the canvas… p755
It is usually acceptable to dry these covers outdoors, but avoid doing so on windy days.
Moving materials to a safe location… p763
You should not gather or handle evidence unless it is absolutely necessary in order to preserve it. If you handle, move, or gather evidence, you become part of that chain of custody for that evidence. You must document all actions associated with that evidence.
Using a 30m section of hose as the first section on attack lines greatly reduces the chances that any couplings other than those at the nozzle will be inside the building.
True but possibly not relevant for CFD
Wetting agents such as Class A foam should be used to extinguish hidden fires. The penetrating qualities of wetting agents facilitate extinguishment in cotton, upholstery, and baled goods. p745
The only way to ensure that fire are out in large items is to pull them apart and and extinguish hidden fires.
Abnormal behavior of fire when water is applied… p761
Observe how the fire behaves when water is applied to it. Flashback, reignition, several rekindles in the same area, and an increase in intensity of the fire may indicate accelerant use.