TD 46

Question 1

Rotary wing instrument flight maneuvers: an aircraft is flown in instrument flight by controlling _____ and _____ as necessary to produce desired performance

Answer 1

Attitude, power

Question 2

Primary and uplifting methods: what are the four elements of control?

Answer 2

Pitch, Bank, Roll, Trim

Question 3

Which instrument should always be used if available because it instantly portrays the actual bank and pitch of the aircraft and is central focus of a good cross check?

Answer 3

Attitude indicator

Question 4

Cross-check: in general, the most important instruments to watch during any particular maneuver associated with tasks 1166.01 through 1166.06 are those ________________

Answer 4

That are to be held constant

Question 5

In calm air the aircraft will ____ heading and altitude with __ input from the pilot, if the attitude and power are set properly.

Answer 5

Maintain, no

Question 6

Deviations in altitude (

Answer 6

100, 5

Question 7

A change of approximately one (1) FLI will result in a ____ FPM climb or descent. This equates to a __ % change in torque from cruise flight.

Answer 7

500, 10

Question 8

Level off should be accomplished by adjusting power to cruise torque beginning ___ feet (__% of the rate of climb or descent) prior to the desired altitude.

Answer 8

50, 10

Question 9

Standard rate turn:
A the turn is initiated with reference to what instrument?

B the desired angle of bank is how many degrees?

C in a standard rate turn how many degrees does the aircraft change per second/10 seconds/ one minute?

Answer 9

A attitude indicator

B 3 degrees a second

C 3, 30, 180