Climb Knowledge

Question 1

At what minimum altitude would PF call for the After Takeoff Check?

Answer 1

1500ft AFE

Question 2

What is the thrust initially set to during the climb thrust flow item (T/O Climb Thrust)

Answer 2

NORM: 2-3% reduction then adjusted with PERF
FLX: PERF

Question 3

Where is the bleed transfer procedure located?

Answer 3

SOPM APU Operation

Question 4

What is checked when verifying gear and flaps are up?

Answer 4

ED-1 indicates Gear UP

ED-1 indicates Flaps 0

Question 5

What are you checking during the CAS flow item?

Answer 5

That Advisory and Status messages are normal

Question 6

What is the climb speed schedule below 10000ft?

Answer 6

Norm: 250kts
Min: Vmd

Question 7

What is the climb speed schedule above 10000ft?

Answer 7

Norm: 290/.70
L Range: 250/ .70
H Speed: 320/.77
Min: 250/.70

Question 8

What speed would you fly if you are late and you are above 10000ft and the SID along this leg is 250IAS?

Answer 8

250IAS

Question 9

What deviation criteria requires callouts from the PM?

Answer 9

TGT Speed +/- 10kts or .02M = “SPEED”
Bank Angle >30 degrees = “BANK”
HDG from bugged +/- 10 degrees = “HEADING”
Course 1/4 deflection from established = “COURSE”
Pitch excceds normal ops = “PITCH”
Vert SPD too high or low = “VERTICAL SPEED”
Autopilot/FD malfunction = “Call Failure”
Perform EGPWS callouts

Question 10

What is the PF actions and response for deviations?

Answer 10

Corrects the deviation then says “CORRECTING”

Question 11

What exterior lights MUST be on above 10000ft?

Answer 11

• NAV
• BEACON
• STROBE (unless blinding)