MD-11/10 Preflight Inspection (FM 3.0)

Question 0

Interior Inspection

Cockpit Safety Check

Answer 0

Review ACRT Log Book

4 Overhead
Emergency Power Sw OFF
Fuel Dump Sw OFF
2 Windshield Wipers OFF

1 Forward
Gear Handle Down and In
-with AC Power-
4 Green / Center Gear ISO - Out

4 Pedestal          
Parking Brake                     OFF
Flaps / Slats Handle         Agree
Fuel Levers                         OFF
Radar                                    OFF

Question 1

Exterior Inspection

External Safety Check

Answer 1

2 Gear
Nose Gear Secure
- NLG tethered to ramp or tug
- NLG attached to weight cart
- Alt. Loading method (ballast pallet / sequential loading)
Main Gear Secure (chocked or connected to tug and tow bar)

2 Wings
Flt Control Surfaces Clear
Flaps / Slats position Observe

2 Door
Main Gear Doors Closed
APU Intake / Exhaust Clear

Question 2

Before Applying Electrical Power

Answer 2

S - Safety Check
L - Log Book
C - Circuit Breakers

Question 3

Flight Deck Prep

Answer 3

B - Battery On (battery bus OFF {light out})
E - Evaluate Electrical (evaluate and apply)
F - Fire Test
A - APU Start
S - Serviceable (eng. page - oil qty. min 17/16 or 12 qts within 30 min of shutdown / config page - complete picture with no amber)
S - Status Page (nothing unexpected / MAINT column blank)
T - Test HUD / Annunciator lights
- Deploy HUD for test
- Hold “Annunciator Lights Test” until AIR SYST TEST on EAD (TEMAC)

Question 4

Fire Test DC

Answer 4

7 Lights

3 Fire Handles
1 APU Fire Handle
3 Fuel Levers

Question 5

Fire Test AC

Answer 5

7 Lights from DC + 2/3/4

2 - Master Warning
3 - Engine Fire Bell
- Tri-Tone (sounds for APU part of test)
- Voice Warning (Betty for each engine)
4 - All four level 3 alerts (3 Eng / 1 APU)

Question 6

Annunciator Lights Test

Lights Not On

Answer 6

1. MIC and IDENT ON (pedestal)
2. Park Brake Light (pedestal)
3. MAINT INTPH ON (fwd OVRD)
4. GLY EXT PWR (aft OVRD - inop)
5. Engine and APU fire indicators (OVRD / GCP / pedestal)

Question 7

FO Flight Deck Prep

Answer 7

1. ACFT Log Review
2. EFB Initialize
3. GCP
4. EAD / SD / NO / PFD
5. Static Air Selector
6. SISP
7. Oxygen
8. Audio Control Panel
9. ACARS