Bronto Skylift Flashcards
What is the max cage load on the Bronto?
1000 lbs
What is the total weight of the Bronto?
75,000 lbs
Or
34 tons
What is the max outrigger width of the Bronto?
22ft
What is the max wind speed allowed using the Bronto?
31mph
What is the max amount of belts allowed per anchor point in the working cage on the Bronto?
3 belts per anchor point
If one or more of the stabilizer jacks lose the ground pressure, what happens?
All stabilizer Jack signal lights go off
What is the max amount of time that you should use the battery-powered pump and why?
8 minutes max
Excessive use may overheat the pump motor
In an emergency, how do you stop the automatic leveling system and the engine of the chassis?
by pushing the emergency stop-push button of the central unit
What does each one control on the selector switch? I? O? II?
I- outriggers to operating position and automatic leveling
O- the remote control unit is OFF
II- outriggers to transport position
When will automatic leveling stop?
Immediately after you release the push-button of the remote control unit
What does it mean if the buzzer beeps when you are leveling?
that the inclination of the ground is more than 2 degrees
If on a slope, how should you position the vehicle?
cab must always be downwards
How far should the vehicle be positioned away from objects?
7-15 meters
What needs to be done when leaving turntable?
always transfer operations to cage
Which is first…retract the telescopic section or lower the 1st boom?
always retract the telescopic section first