SOG 7-04 1st Arriving MVC

Question 1

According to SOG 7-04 First Arriving at MVC

What 3 steps that first arriving apparatus should do at MVC?

Answer 1

• stabilize scene
• stabilize vehicle
• stabilize patient

Question 2

According to SOG 7-04 First Arriving at MVC

What’s included in stabilizing scene?

Answer 2

• traffic control
• deploy 45mm hose
• deal with safety hazards (downed hydro lines, fuel spills)
• ensure adequate lighting

Question 3

According to SOG 7-04 First Arriving at MVC

What’s included stabilizing vehicle?

Answer 3

• cribbing
• consider disconnecting battery
• ensure vehicle in park

Question 4

According to SOG 7-04 First Arriving at MVC

What’s included with stabilizing patient?

Answer 4

• assess patient and provide proper care

-

Question 5

According to SOG 7-04 First Apparatus at a MVC
An orange high voltage cable commonly runs under the vehicle chassis, posing a shock hazard when you do three of the following except?
A. Disconnected
B. Cutting into cable
C. Lifting
D. Stabilizing

Answer 5

This is an improper question. Same sentence in the SOG talks about not disconnecting or cutting

A. Disconnected

Question 6

According to SOG 7-04 First Apparatus at a MVC
The orange high voltage cable should not be ____, ______ or ______ due to the shock hazard?
A. Disconnected, cut or lifted
B. Handled, removed or disconnected
C. Disconnect, handled or cut
D. Cut, removed or disconnected

Answer 6

C. Disconnect, handled or cut

Question 7

According to SOG 7-04 First Arriving at MVC

High voltage systems need to be ________ _____befire entering damaged hybrid or electric vehicles

Answer 7

Shut down

Question 8

According to SOG 7-04 First Arriving at MVC

Submerged hybrid / electrical vehicles, 3 things?

Answer 8

• avoid HV components
• if possible turn engine off
• if can not turn off wait till out of water and drained to try

Question 9

According to SOG 7-04 First Arriving at MVC

Might be ______ power in other batteries or other sources

Answer 9

• residual

Question 10

According to SOG 7-04 First Arriving at MVC What is the primary purpose of completing a 360-degree assessment at a motor vehicle collision scene?
a) To identify the type of vehicle
b) To stabilize the patient
c) To deploy a foam line
d) To control traffic

Answer 10

a) To identify the type of vehicle

Question 11

According to SOG 7-04 First Arriving at MVC Which action is part of stabilizing the vehicle at a collision scene?
a) Administering first aid to the occupants
b) Ensuring the vehicle is in Park with the engine off and keys removed
c) Checking for fuel spills
d) Directing traffic

Answer 11

b) Ensuring the vehicle is in Park with the engine off and keys removed

Question 12

According to SOG 7-04 First Arriving at MVC What is the primary consideration when dealing with Hybrid/Electric Vehicles (EV) in terms of high voltage cables?
a) Cutting and disconnecting the orange high voltage cable
b) Handling the orange high voltage cable without protective gear
c) Ignoring the presence of high voltage cables
d) Not cutting, disconnecting, or handling the orange high voltage cable due to shock hazards

Answer 12

d) Not cutting, disconnecting, or handling the orange high voltage cable due to shock hazards

Question 13

According to SOG 7-04 First Arriving at MVC What precaution should be taken regarding high voltage systems before entering damaged hybrid or electric vehicles?
a) Ignore the high voltage systems
b) Shut down high voltage systems
c) Increase the power to high voltage systems
d) Remove the battery

Answer 13

b) Shut down high voltage systems

Question 14

According to SOG 7-04 First Arriving at MVC In stabilizing the scene of a motor vehicle collision, what is the purpose of deploying a 45mm foam line?
a) To cool down the vehicle engine
b) To create a barrier between vehicles
c) To suppress any potential fires
d) To wash away spilled fluids

Answer 14

c) To suppress any potential fires

Question 15

According to SOG 7-04 First Arriving at MVC What is the recommended action when dealing with a submerged hybrid or electric vehicle if the ignition cannot be turned off?
a) Attempt to disable it immediately
b) Wait until the vehicle is drained of water before attempting to disable it
c) Disconnect the battery
d) Call for additional assistance

Answer 15

b) Wait until the vehicle is drained of water before attempting to disable it

Question 16

According to SOG 7-04 First Arriving at MVC What is the primary consideration when dealing with a patient in a motor vehicle collision?
a) Assess and stabilize the patient
b) Control traffic
c) Deploy a foam line
d) Disconnect the battery

Answer 16

a) Assess and stabilize the patient

Question 17

According to SOG 7-04 First Arriving at MVC What is the primary purpose of traffic control at a motor vehicle collision scene?
a) To speed up the traffic flow
b) To create chaos on the road
c) To ensure the safety of responders and victims
d) To direct vehicles away from the scene

Answer 17

c) To ensure the safety of responders and victims

Question 18

According to SOG 7-04 First Arriving at MVC Why should high voltage systems be shut down before entering damaged hybrid or electric vehicles?
a) To increase the risk of shock hazards
b) To decrease the risk of accidental movement
c) To save battery power
d) To enhance extrication procedures

Answer 18

b) To decrease the risk of accidental movement

Question 19

According to SOG 7-04 First Arriving at MVC What action is recommended for stabilizing a vehicle, apart from ensuring it’s in Park with the engine off and keys removed?
a) Ignoring the vehicle stabilization
b) Using cribbing
c) Deploying a foam line
d) Disconnecting the battery

Answer 19

b) Using cribbing

Question 20

According to SOG 7-04 First Arriving at MVC, if possible turn the ignition off in a submerged vehicle, what else can you attempted to do?
A. Disconnect orange line
B. Do not attempt any other disabling activities
C. Wait for it to drain and turn off
D. Avoid cutting

Answer 20

B. Do not attempt any other disability activities