SOG 26-13 Insulated Electrical Glove Ensembles

Question 1

According to SOG 26-13 Insulated Electrical Glove Ensemble What components make up the Insulated Electrical Glove Ensemble?
A. Leather gloves only
B. Rubber gloves only
C. Rubber gloves and leather protectors
D. Cotton gloves and leather protectors

Answer 1

C. Rubber gloves and leather protectors

Question 2

According to SOG 26-13 Insulated Electrical Glove Ensemble Where should the Insulated Electrical Glove Ensemble be stored when not in use?
A. Wet and humid area
B. Clean, dry, cool, well-ventilated location
C. Any location inside the vehicle
D. In a metal toolbox

Answer 2

B. Clean, dry, cool, well-ventilated location

Question 3

According to SOG 26-13 Insulated Electrical Glove Ensemble How often should the Insulated Electrical Glove Ensemble be inspected?
A. Monthly
B. Annually
C. Weekly
D. Bi-weekly

Answer 3

C. Weekly

Question 4

According to SOG 26-13 Insulated Electrical Glove Ensemble What is the maximum voltage of protection for Class 0 rubber gloves?
A. 500 volts
B. 750 volts
C. 1000 volts
D. 1500 volts

Answer 4

C. 1000 volts

Question 5

According to SOG 26-13 Insulated Electrical Glove Ensemble When should the rubber gloves be removed from service?
A. After every use
B. If damaged or after six months without testing
C. Only if visually dirty
D. Never, unless torn

Answer 5

B. If damaged or after six months without testing

Question 6

According to SOG 26-13 Insulated Electrical Glove Ensemble, how should the canvas pouches and leather outer gloves be marked?
A. Inside the gloves
B. On the palms
C. The appropriate vehicle designation
D. On the rubber gloves

Answer 6

C. The appropriate vehicle designation

Question 7

According to SOG 26-13 Insulated Electrical Glove Ensemble When should the Insulated Electrical Glove Ensemble be donned?
A. Inside the hazardous area
B. Anywhere convenient
C. Only during emergencies
D. Outside the hazardous area

Answer 7

D. Outside the hazardous area

Question 8

According to SOG 26-13 Insulated Electrical Glove Ensemble What should be checked prior to donning the rubber gloves?
A. The color of the gloves
B. A valid test date and physical damage
C. The presence of holes in the leather gloves
D. The smell of the gloves

Answer 8

B. A valid test date and physical damage

Question 9

According to SOG 26-13 Insulated Electrical Glove Ensemble How should the leather gloves be worn in relation to the rubber gloves?
A. Underneath the rubber gloves
B. Alternately with rubber gloves
C. Over the rubber gloves as an ensemble
D. Tucked inside the rubber gloves

Answer 9

C. Over the rubber gloves as an ensemble

Question 10

According to SOG 26-13 Insulated Electrical Glove Ensemble What is Flash protection required for when operating disconnect switches?
A. Protecting against fire hazards
B. Protecting against chemical exposure
C. Protecting against electrical contact
D. Protecting against extreme temperatures

Answer 10

C. Protecting against electrical contact

Question 11

According to SOG 26-13 Insulated Electrical Glove Ensemble Who is responsible for establishing and maintaining the schedule for testing and exchanging rubber gloves?
A. Squad members
B. Apparatus and Maintenance
C. Training Division
D. Facility Maintenance Vehicle personnel

Answer 11

Apparatus and Maintenance

Question 12

According to SOG 26-13 Insulated Electrical Glove Ensemble Where should replacement rubber gloves be purchased and stored?
A. Training Division
B. Squads
C. Apparatus and Maintenance Division
D. Technical Rescue Truck

Answer 12

C. Apparatus and Maintenance Division

Question 13

Where can insulated gloves be found?
A. Squads
B. Technical rescue
C. P201, P206
D. Facility maintenance vehicle
E. Training division
F. All the above

Answer 13

F. All the above