SOG 28-05 Cellulose Insulation

Question 1

According to SOG 28-05 Cellulose Insulation What is the primary material used in cellulose insulation?
a. Fiberglass
b. Recycled Newsprint
c. Polyurethane
d. Foam Board

Answer 1

b. Recycled Newsprint

Question 2

According to SOG 28-05 Cellulose Insulation Why are cellulose insulation fibers treated with chemicals?
a. To increase flammability
b. To improve insulation efficiency
c. To make it fire resistant
d. To enhance color

Answer 2

c. To make it fire resistant

Question 3

According to SOG 28-05 Cellulose Insulation Why might a Thermal Imaging Camera (TIC) be ineffective in detecting smoldering cellulose insulation fires?
a. TICs are not designed for insulation materials
b. Low burning temperatures of cellulose
c. TICs cannot penetrate insulation layers
d. Cellulose is naturally invisible to TICs

Answer 3

b. Low burning temperatures of cellulose

It’s correct

Question 4

According to SOG 28-05 Cellulose Insulation What should firefighting personnel do during overhaul operations concerning cellulose insulation?
a. Remove insulation immediately
b. Assess the type of insulation and communicate to the Incident Commander
c. Ignore insulation and focus on other tasks
d. Use positive pressure ventilation

Answer 4

b. Assess the type of insulation and communicate to the Incident Commander

Question 5

According to SOG 28-05 Cellulose Insulation Prior to removing cellulose insulation, what precaution should be taken regarding the building’s electrical power?
a. Increase power supply
b. Isolate the electrical power in the immediate area
c. Use electrical power to dry the insulation
d. Notify the utility company

Answer 5

b. Isolate the electrical power in the immediate area

Question 6

According to SOG 28-05 Cellulose Insulation What precaution is advised when removing cellulose insulation from the structure during a fire incident?
a. Quick removal to prevent further damage
b. Avoid soaking to maintain insulation integrity
c. Contain and tarp or remove room contents carefully
d. Remove without wearing PPE

Answer 6

c. Contain and tarp or remove room contents carefully

Question 7

According to SOG 28-05 Cellulose Insulation What form should be completed before leaving the scene of a cellulose insulation fire incident?
a. After Action Report
b. Incident Report Form
c. Fire Scene Release Form
d. Safety Evaluation Form

Answer 7

c. Fire Scene Release Form

Question 8

According to SOG 28-05 Cellulose Insulation Why is a disposal area set up exterior to the structure during cellulose insulation incidents?
a. To isolate the fire
b. To prevent firefighters’ access
c. To prevent re-ignition and avoid damage to neighboring properties
d. To create a barrier for smoke

Answer 8

c. To prevent re-ignition and avoid damage to neighboring properties

Question 9

According to SOG 28-05 Cellulose Insulation What type of pattern should be used when wetting burning cellulose insulation during firefighting operations?
a. Straight stream
b. Fog pattern
c. Jet spray
d. Cone spray

Answer 9

b. Fog pattern

Question 10

According to SOG 28-05 Cellulose Insulation When is consultation with the on-duty Platoon Chief necessary during cellulose insulation incidents?
a. Before firefighting operations begin
b. After completing overhaul operations
c. Before removing all attic insulation
d. Only if there is a need for outside contractors

Answer 10

c. Before removing all attic insulation

Question 11

According to SOG 28-05 Cellulose Insulation What should the Incident Commander assess for the need of post-incident activities?
a. Public relations
b. Fire Watch
c. Equipment maintenance
d. Fire investigation

Answer 11

b. Fire Watch

Question 12

According to SOG 28-05 Cellulose Insulation What should the owner/occupant(s) be made aware of before re-occupying the structure after a cellulose insulation fire?
a. Types of insulation used
b. Danger of cellulose insulation and the need for a Fire Watch
c. Fire department procedures
d. Fire investigation results

Answer 12

b. Danger of cellulose insulation and the need for a Fire Watch

Question 13

According to SOG 28-05 Cellulose Insulation What is the recommended minimum perimeter to be removed beyond the involved cellulose insulation fire area during firefighting operations?
a. 1 meter
b. 2 meters
c. 5 meters
d. 10 meters

Answer 13

b. 2 meters

Question 14

According to SOG 28-05 Cellulose Insulation Why is the use of Positive Pressure Ventilation (PPV) not recommended during cellulose insulation overhaul operations?
a. It’s ineffective against cellulose fires
b. It can cause re-ignition
c. PPV damages insulation material
d. PPV is not powerful enough

Answer 14

b. It can cause re-ignition

Question 15

According to SOG 28-05 Cellulose Insulation What should the Incident Commander ensure before allowing re-occupancy after a cellulose insulation fire?
a. Working smoke and CO alarms
b. Structural integrity assessment
c. Availability of electricity
d. Weather conditions

Answer 15

a. Working smoke and CO alarms

Question 16

According to SOG 28-05 Cellulose Insulation what could be used to remove cellos insulation if it all had to be removed?
a. fire fighters
b. Peel spill and clean up
c. Vacuum truck
d. tarps

Answer 16

c. Vacuum truck

Should it be necessary to remove all of the cellulose insulation from the attic area the Incident Command shall consult with the on duty Platoon Chief to determine if a vacuum truck would be a viable option to assist in the removal process. The Platoon Chief shall notify the on duty Chief prior to the notification of an outside contractor for the removal.