National Exam Missed Questions (6) Flashcards
Which of the following is a reason to include photographs with an inspection report?
a. provide a visual location of main shut-offs
b. provide substantiation of findings
c. provide a description of the homes floor plan
d. all of the above
all of the above
provide a visual location of main shut-offs
provide substantiation of findings
provide a description of the homes floor plan
Of the components below, which can you expect to have the shortest service life span?
a. gas furnace
b. steel boiler
c. cast iron boiler
steel boiler
Dropped, tray and cove ceilings do not require special installation techniques. T/F
False
Which of the terms below are associated with masonry?
a. apron
b. travertine
c. anthropic
d. all of the above
all of the above
apron
travertine
anthropic
Indicating an attic’s insulation to have a high R value is a preferred finding to include on your report. T/F
True
Thermal pane windows should be replaced when?
a. when window squeaks
b. when window is wet
c, when window is cloudy
when window is cloudy
Flue liners are used to protect chimneys from _, _ and _.
a. rain, condensation & excess fuel
b. bugs, excess fuel & debris
c. rain, bugs & debris
rain, condensation & excess fuel
Which part of the air conditioner can generally be expected to last the longest?
a. filter
b. coolant container
c. condenser coil
condenser coil
Picture windows are most commonly found in homes older than 30 years. T/F
False
If you notice the home owner has erected additional walls, including divider walls, it is appropriate to ask for documentation that the addition was approved by an engineer. T/F
True
What is the maximum acceptable height difference between risers for stair safety?
a. 0”
b. 1/4”
c. 1/2”
d/1”
1/4”
Slate shingles have the longest expected service life. T/F
True
Which of the following areas does not require ground-fault circuit interrupters?
a. garage
b. living room
c. deck
living room
A circuit breaker will generally trip when the electrical service is less than 100 amps at 110/220 volts. T/f
True
What types of material are most likely to develop mold when exposed to moisture?
a. cotton, paper, wool
b. cloth, wool, aluminum
c. paper, wool, cloth
cotton, paper, wool