(1) TB 160- Non-contact Thermometer Flashcards
The TIA NC -9900 no contact thermometer emits how many warning beeps if the patient has a fever?
3
No contact thermometer:
Before first use or after changing the battery, wait ___ to ___ minutes for the device to warm up
5 to 10
No contact thermometer:
After pressing the trigger button, temperature is displayed in a ___ second. Allow at least ___ seconds between measurements.
1/2
15 sec (1 minute is recommended)
No contact thermometer:
The Fever 3-Beep Alarm is set to actuate at ____°F
100.5
No touch thermometer:
To obtain an accurate temperature reading it is essential that the device remain in ____ mode.
Body
No contact thermometer:
When the LCD screen displays ____ the battery is depleted and needs to be replaced.
”+”
No contact thermometer:
Can the thermometer be submerged in a cleaning solution or placed under running water for cleaning?
No, this device is not fluid proof.
It should be wiped clean with a cloth moistened with an anti-microbial solution and then wiped dry.
No contact thermometer:
When the display shows “HI”, this Indicates that the temperature reading is above ____ °F (in body mode)
109°F
No contact thermometer:
When the display shows “LO”, this Indicates that the temperature reading is below ____ °F
90°F
The TIA NC -9900 no contact thermometer will allow temperatures to be taken at a distance of approximately __ to __ inches from the forehead.
2 to 6 inches
