QHSE Policies & Standards Part 3

Question 1

Environmental Standard (Definitions,Responsibilities,Objectives, Plans,etc.)

Answer 1

• Std 8. Shall be use to manage the environmental risks associated to SLB activities, products and services.
• Objective is to manage the activates, products and services of SLB in order to minimize out environmental impacts.
• Aimed to protect the environmental, prevent pollution, minimize environmental impact, and comply with environmental laws and regulatory requirements where we operate.
• Definitions:
  
  • Accidental Release: Any spill, leak, or other undesired loss of hazardous substances, crude oil, or produced water into the environment.
  • Hazardous Substance: Any material, chemical, or waste classified as hazardous by local environmental laws or regulatory requirements.
  • Spill: Any undesired loss of primary containment of a hazardous substance irrespective of the quantity recovered or of the presence of an impermeable secondary containment
• Responsibilities: All Employees are responsible for environmental protection and for the minimization of environmental impact. Line managers and supervisors are responsible for compliance with the standard
• Plans: All sites must have plans in place to manage wastes, wastewater discharges, hazardous air emissions, and spill contingencies. These plans should be documented.

Question 2

What does WSSS stand for?

Answer 2

Well Services Safety Standard

Question 3

Explain WS std 5 - Well site operations

Answer 3

Set of rules for all well site activities (operations), from rig up(pre job meeting), execution of the job such as prime up, pressure test, flow back, approved hoses, approved treatment equipment.

Objective To prevent injury to Schlumberger and third party personnel and damage to
equipment involved with well site operations, as well as ensuring delivery of the
best service quality possible.

Question 4

Explain WS std 18 Chemical product management

Answer 4

Set of rules for how to handle, store and pump chemicals.

This standard identifies the procedures for chemical product management, chemical hazard communication (HAZCOM), material handling, including purchase and inventory, and the use or sale of approved Well Services chemical products at all Well Services locations

Question 5

Explain WS std 28 Land Pressure management operations.

Answer 5

Set of rules to identify risks and how to mange them related with land operations and pressure

This standard discusses risk identification and assessment for land pumping operations so that jobs are performed only where risks are acceptable.

Question 6

Explain WS std 30 Mixing and Pumping flammable and combustible fluids

Answer 6

This standard applies when mixing, handling and pumping combustible and flammable materials. It includes handling of flammable and combustible components at the district or at the wellsite.

Because mixing and pumping combustible or flammable fluids presents risks, pre-job risk evaluation must be undertaken to determine if a job can be performed safely. The standard is a guide for evaluating and classifying risk.