NEM Chapter 076, Reliability & Maintainability

Question 1

RCM

Answer 1

Reliability Centered Maintenance

Question 2

Changes to equipment or systems that change the design or design capabilities to improve inherent reliability or functionality

Answer 2

Alternative maintenance

Question 3

The percent of time that a system is ready for use

Answer 3

Availability

Question 4

Maintenance required to restore operation of systems or equipment to design parameters when functional failure has occured

Answer 4

Corrective maintenance

Question 5

The percent of time that a system is theoretically available for use

Answer 5

Inherent availability

Question 6

Failure of an item to perform its normal or characteristic actions within specified limits

Answer 6

Functional failure

Question 7

Any person responsible for managing alternative, preventive, or corrective maintenance

Answer 7

Maintenance manager

Question 8

The percent of time that an operation system is ready for use

Answer 8

Operational availability

Question 9

PMS

Answer 9

Planned Maintenance System

Question 10

Actions taken to minimize conditions that cause unacceptable degradation of functions, prior to the occurrence of actual failure

Answer 10

Preventive maintenance

Question 11

Method for determining preventive maintenance requirements based on the analysis of the likely functional failures of hardware having a significant impact on safety, operations, and support functions

Answer 11

RCM

Question 12

Product of probability of failure times severity of failure

Answer 12

Risk

Question 13

Ability of the system to meet operational needs and the cost of maintaining it

Answer 13

System performance

Question 14

Unit level information system that supports management of maintenance, supply and configuration

Answer 14

CMplus

Question 15

CMplus exchanges data with ___

Answer 15

The Fleet Logistics System

Question 16

This data is used to describe operational availability at the unit level

Answer 16

CMplus

Question 17

Enterprise used by Commandant, SFLC, Product Lines, and NESUs to manage maintenance, contracts, supply, and configuration

Answer 17

Fleet Logistics System

Question 18

FLS

Answer 18

Fleet Logistics System

Question 19

This data is used to describe operational availability at the fleet level

Answer 19

FLS

Question 20

CG enterprise information system for management of logistics

Answer 20

Vessel Logistics System

Question 21

VLS

Answer 21

Vessel Logistics System

Question 22

NESSS

Answer 22

Naval and Electronics Supply Support System

Question 23

Most important VLS applications

Answer 23

CMplus
FLS
NESSS

Question 24

Used to manage supply data for the fleet

Answer 24

NESSS

Question 25

Used to trend supply demand data and provide updates to CMplus

Answer 25

NESSS

Question 26

ALMIS

Answer 26

Asset Logistics Management Information System

Question 27

ALMIS support maintenance management through ___

Answer 27

Asset Computerized Maintenance System (ACMS) for configuration management Electronic Asset Logbook (EAL) for unscheduled maintenance Asset Maintenance Management Information System (AMMIS) for supply management

Question 28

___ shall use ACMS to document MPCs performed

Answer 28

Maintenance managers

Question 29

___ shall enter the MPC sign off data into ACMS

Answer 29

Field Terminal Operators

Question 30

Unscheduled maintenance without an MPC is documented in ___

Answer 30

EAL

Question 31

Closed loop process that supports continuous improvement

Answer 31

FRACAS

Question 32

The result of FRACAS is a ___

Answer 32

TCTO, revision to maintenance requirements or supply support, or other logistics improvement

Question 33

RCM PMS five different directed tasks

Answer 33

Condition directed tasks Time directed tasks Failure finding tasks Servicing and lubrication tasks