NEM Chapter 044, Machinery Space Watch Requirements

Question 1

Who is responsible for developing watch standing policies and procedures

Answer 1

EO/EPO

Question 2

All cutter and boat operating machinery shall be inspected every ___

Answer 2

Hour

Question 3

Cutters equipped with video and electronic control and monitoring systems that in addition to monitoring spaces for fire and flooding, can alert the watchstander of abnormal system parameters prior to failure, can reduce inspection requirements on operating machinery to at least once every ___

Answer 3

Four hours

Question 4

Operating machinery must be checked at least once every ___ when in port between the hours of ___

Answer 4

Four hours

0600 to 2200

Question 5

Between the hours of 2200 and 0600, in port inspection requirements can be further reduced if all berthing areas are equipped with ___

Answer 5

Adequate installed fire and flooding sensor alarms to alert a sleeping watchstander, provided the watchstander is onboard at all times

Question 6

All propulsion machinery shall be attended during ___

Answer 6

Main engine start, warm-up/securing, and during other than normal operating conditions