EJET AQP 2023 MEMORY ISSUES

Question 1

MAX EGT FOR APU START?

Answer 1

1,032 degrees C

Question 2

APU STARTER COOLING PERIOD?

Answer 2

Attempts 1,2
1 min ON, 1 min OFF

Attempts 3
1 min ON, 5 min OFF

Question 3

MAX TAKEOFF AND GO AROUND ITT

Answer 3

990 degrees C
(Can be exceeded up to 1,006 degrees C for 2 minutes)

Time limited to 5 minutes with all engines operative, 10 minutes with single engine

Question 4

What is the maximum engine oil transient temperature?

Answer 4

163 degrees C (above 155 degrees, limited to 15 minutes)

Question 5

Dry Motoring Duty Cycle Limits:

Attempt 1*
Attempt 2-5 *

Answer 5

Attempt 1:
90 Seconds ON, 5 minutes OFF

Attempt 2-5:
30 Seconds ON, 5 Minutes OFF

Note: after 5 sequential motorings, cycle may be repeated after following a 15 minute cool down

Question 6

Max latitude for stationary alignment

Answer 6

78.25 degrees North and 78.25 degrees south

Question 7

Temperature Compensation BARO-NAV operation

Answer 7

1.) must be coordinated with ATC

2.) Must be used for operation outside the temperature limits published on the approach procedure

Question 8

What is the length of the E175?

Answer 8

103’ 11”

Question 9

What is the wingspan of the E175?

Answer 9

93’ 11”

Question 10

What is the distance you need to make a 180 degree turn in E175?

Answer 10

52’ 9”

Question 11

With FD inoperative what pitch angle would you use for flaps 2?

Answer 11

10 degrees

Question 12

PITCH TRIM RUNAWAY

Answer 12

AP/TRIM DISC Button - Press and hold

Pitch trim SYS 1 and SYS 2 cutout buttons - PUSH IN