Cordless Rebar Cutters

Question 1

Who carries cordless Rebar Cutter?

Answer 1

LADDER/RESCUE /SQUAD

Question 2

Cordless Rebar Cutter used for?

Answer 2

removing window and door gates
cut wrought iron fences up to 5/8” in diameter

NOT to be used on case hardened steel rods or locks

Question 3

Postion tool at ____to the bar and secure it by adjusting the screw provided?

Answer 3

RIGHT ANGLE

-depress trigger until blade comes to a complete stop, then release trigger…this will discharge pressure and return blade to its starting position

Question 4

emergency Manual release pressure and return to starting position?

Answer 4

release trigger switch, slightly loosen release valve button

-tighten release valve before next tool operation

Question 5

DO NOT use cordless rebar cutter in explosive atmosphere….tool creates sparks.

Answer 5

Do Not point cutting head towards any person when operating.

-do not replenish with hydraulic oil when tool is warm

Question 6

Lobester Rebar Cutter?

Answer 6

• will not work well UNDER 32 DEGREES F
• 180 degree turning angle of swivel head
• pilot lamp display will flash when battery is less than 20 percent capacity
• Fully charged battery will last 40 CUTS
• check WEEKLY
• cutting blades CAN be changed by members
• replacement blades from Tech Services
• UNITS should change hydraulic oil every 6 months (JAN 1 and JULY 1)