Tech Specs (class room)

Question 1

Mode 1

Answer 1

• Power Operation
• RTP >5%

Question 2

Mode 2

Answer 2

• S/U
• <=5%

Question 3

Mode 3

Answer 3

• Hot Standby
• > =350 degrees

Question 4

Mode 4

Answer 4

• Hot Shutdown
• 349-201 degrees

Question 5

Mode 5

Answer 5

• Cold Shutdown
• <=200 degrees

Question 6

Mode 6

Answer 6

Refuel

Question 7

LCO 3.0.1

Answer 7

LCOs must be met

Question 8

LCO 3.0.2

Answer 8

Eneter conditions if LCO is not met

Question 9

LCO 3.0.3

Answer 9

Shutdown if there is not an LCO for condition. Mode 3 in 7 hours, Mode 4 in 13 hours and Mode 5 in 37 hours

Question 10

LCO 3.0.4

Answer 10

Mode changes with LCO active can happen when:
A- Allows me to be in condition forever
B- Risk assesment made
C- LCO has note allowing condtions

Question 11

LCO 3.0.4 exceptions?

Answer 11

1. LTOP system shall be operable
2. One ECCS train shall be operable
3. 4 AFW flow paths and 3 AFW pumps shall be operable
4. AC sources (2 qualified circuits for offsite, 2 EDGs)

Question 12

SL 2.1?

Answer 12

1. Reactor Core SL. (DNBR ratio, and peak fuel centerline temperature)
2. RCS pressure In modes 1-5 shall be less than 2735psig

Question 13

SL 2.2 SL Violations

Answer 13

1. If 2.1 is violated, restore compliance and be in mode 3 within 1 hour
2. If 2.2 is violated in mode 1 or 2 then restore compliance and be in mode 3 within 1 hour, if in Mode 3-4-5 restore compliance within 5 minutes.