TB 176 Seek Reveal Firepro Thermal Imaging Camera

Question 1

The Reveal FirePRO delivers high-resolution thermal imaging and comes with a powerful ____ (LED) light, which is available at the touch of a button.

Answer 1

300-lumen light emitting diode

Question 2

It is a tool that provides information that will allow a firefighter to be safer, make better decisions, and to have ____.

Answer 2

increased situational awareness

Question 3

The Reveal FirePRO is an inventory item and one unit is assigned to ____ fire suppression position.

Answer 3

each

Question 4

To turn the device on, press the ____ button and hold until the screen lights up.

Answer 4

CENTER

Question 5

For numerical fields, the ___ button___ from the displayed value, while the RIGHT button adds to it, as the button function ribbon indicates.

Answer 5

LEFT / subtracts

Question 6

To switch the device off, press and hold down the CENTER button for ___ until the screen goes dark.

Answer 6

2 seconds

Question 7

The user will be directed to an initial set-up screen to select ____, _____.

Answer 7

language / date and time formats

Question 8

To access the menu, simultaneously press both the ____ button and hold for at least ____.

Answer 8

LEFT and RIGHT / one second

Question 9

The menu allows the user to access the following

Answer 9

Gallery, Switching Temperature Settings from Fahrenheit (°F) to Celsius (°C), Device Settings, Flashlight, and Device Information.

Question 10

Language: This option allows the user to choose between ____

Answer 10

English, Spanish, French, or German.

Question 11

Power: Selecting the POWER button will enable the user to modify two settings, ______. In the “Auto” option the user can choose whether the device will ____ has been detected for a selected period of time.

Answer 11

“Auto” and “Display” / turn off after no interaction

Question 12

The default for “Auto” is set to the “____” position to ensure the device will not accidently trigger an automatic “Power Off” during an emergency.

Answer 12

Off

Question 13

When the device is on, it is set to a default of ____ which can be adjusted more or less depending on the user’s preferences.

Answer 13

15 minutes

Question 14

The “Display” option allows the user to adjust the brightness of the liquid crystal display (LCD) screen between the ranges of ___.

Answer 14

1-100%.

Question 15

Pressing the button four times will toggle you through the options _______. The flashlight will work whether the camera is on or off.

Answer 15

“High,” “Low,” “Strobe,” and “Off.”

Question 16

Watermark: Press the CENTER button to turn the Seek thermal watermark symbol present at the bottom left of the scanning screen ___.

Answer 16

on or off

Question 17

Each device has been registered with the ____.

Answer 17

LAFD Equipment Engineering Unit

Question 18

The temperature color bar visually displays a temperature range up to _______.

Answer 18

1022°F (550°C

Question 19

The lower number in the temperature bar identifies which temperature the image begins to ____.

Answer 19

colorize

Question 20

Anything below the bottom temperature will appear _____, with high dynamic range, and anything above it will begin to colorize.

Answer 20

black and white

Question 21

To cycle through the different modes, press the ___ button until the selected mode is desired.

Answer 21

LEFT

Question 22

Fire Mode
This mode is specifically designed for locating ____; this can be accomplished during 360 size-ups and ____. This mode displays an image in shades of black and grey which turn bright orange/red when areas of extreme heat are present.

Answer 22

hotspots / overhaul

Question 23

Survey Mode

This mode is optimal for helping locate ___ or ____ during search and rescue.

Answer 23

downed firefighters / victims

Question 24

Survey Mode

This mode has a ____ filter of different shades of blue which turn ____ areas.

Answer 24

monochromatic / white around warmer

Question 25

Color Mode

This is a demonstration mode and is best suited for ___.

Answer 25

classroom training

Question 26

Color Mode

It highlights areas of heat in ___ with colorful borders as the temperature decreases.

Answer 26

red

Question 27

Color Mode

While it is seldom used in the field, it is normally used to demo the thermal imaging camera to ____.

Answer 27

third party observers

Question 28

To take a photo, press the ___ button to capture an image.

Answer 28

RIGHT

Question 29

The camera will immediately freeze frame and form a ___ around the perimeter of the image.

Answer 29

white border

Question 30

Thermal photos may be reviewed by pressing the _____ button
simultaneously to access the main menu, and pressing the RIGHT button to go to “____” Press the CENTER button to view recent photos taken.

Answer 30

LEFT and RIGHT / Gallery.

Question 31

The battery charge level will only appear when plugged in and the ____ buttons are pressed.

Answer 31

LEFT or RIGHT

Question 32

The Reveal FirePRO will provide up to ____ of scanning time with a full charge.

Answer 32

four hours

Question 33

The Reveal FirePRO is waterproof, drop proof, shockproof… but only if the ____ is fully closed after charging.

Answer 33

rubber back door (battery cover/plug)

Question 34

For members carrying one radio, the camera shall be attached (using supplied caribiner) to one of the ___ on front of the turnout coat above the____.

Answer 34

extension mic holders / empty radio pocket

Question 35

For members utilizing two radios, the Reveal FirePRO shall be carried inside the facepiece pouch of the turnout coat, while attached to a _____

Answer 35

secure point (e.g. mic holder or attachment ring on turnout coat).

Question 36

The Reveal FirePRO should be checked daily and after each use for ____.

Answer 36

damage and battery charge

Question 37

If the Reveal FirePRO is not functioning properly, return it to the LAFD ____ for an evaluation.

Answer 37

Equipment Engineering Unit

Question 38

The recommended cleaning material for the lens is a cotton swab and _____.

Answer 38

isopropyl alcohol

Question 39

Cleaning lens

Answer 39

Apply small amount of isopropyl alcohol to the clot of the cotton swab.
Use the cotton swab to lightly rub the reflective inner lens of the camera until clean.
Lightly pat and dry the lens with a clean cloth and let air dry.

Question 40

Do not use___, ____, or ____ and never spray anything directly on the screen of the device.

Answer 40

window cleaners / harsh chemicals / cleaning solvents

Question 41

The device will not power on.

Plug the device in with the supplied wall charger or another ___ charger to ensure there is enough battery remaining.

Answer 41

1-amp-rated

Question 42

The device will not power on.

Perform a hard system reset by holding down the ____ button for ____, release and wait.

Answer 42

CENTER / thirty seconds

Question 43

The device will not power on.
If the device gets stuck at the welcome screen, perform a hard reset. Battery power should be at least ___ to achieve optimal performance.

Answer 43

40%

Question 44

The device will not power on.

If the ___ but the thermal imager does not turn on, charge the device with a wall charger.

Answer 44

flashlight works

Question 45

When the battery voltage drops to near empty, the flashlight will begin to dim to ___ and allow the thermal imager to work.

Answer 45

preserve battery life

Question 46

4 bars

Answer 46

more than 85%

Question 47

3 bars

Answer 47

65% to 85%

Question 48

2 bars

Answer 48

33% to 65%

Question 49

1 white bar

Answer 49

10% to 33%

Question 50

1 red bar

Answer 50

less than 10%