TB 112 Foam Tender Specs

Question 1

The Foam Tender is built on a _____ with a Cummins model ISM 450 “Celect-Plus” engine.

Answer 1

Freightliner FL112 chassis

Question 2

A ___ Class “A” foam concentrate tank.

Answer 2

200-gallon

Question 3

A ____ Class “B” foam concentrate tank.

Answer 3

1000-gallon

Question 4

___ foam concentrate pumps.

Answer 4

Two

Question 5

A ____ per minute air compressor used for either the compressed air foam system or pneumatic tools such as those used by USAR apparatus.

Answer 5

400 cubic foot

Question 6

Large capacity water ____.

Answer 6

inlets & discharges.

Question 7

___ large top mounted monitors.

Answer 7

Two

Question 8

_____ dry chemical “Purple-K” systems.

Answer 8

Two 350-pound (total of 700 pounds)

Question 9

___ passenger seating.

Answer 9

Two

Question 10

Flow large volumes of water (____).

Answer 10

in excess of 4000 GPM

Question 11

Add ____ to either the Class “A” or the Class “B” foam systems.

Answer 11

compressed air (CAFS)

Question 12

Re-supply another___ or other apparatus with Class “A” or Class “B” foam concentrates.

Answer 12

Foam Tender

Question 13

A top mounted front monitor flowing up to _____.

Answer 13

1,500 gallons per minute

Question 14

A top mounted rear monitor flowing up to ____.

Answer 14

2,000 gallons per minute

Question 15

A passenger side and drive side discharge flowing up to _____.

Answer 15

800 gallons per minute.

Question 16

A rear discharge flowing up to ____

Answer 16

2,000 gallons per minute.

Question 17

Class A foam solution range

Answer 17

0.3% to 1%

Question 18

Class A

2,000 gallons per minute at ___.

Answer 18

1.0%

Question 19

Class A

4,000 gallons per minute at ____.

Answer 19

0.5%

Question 20

Class B foam range

Answer 20

1% to 10%

Question 21

The Class “B” concentrate pump can pump ___ per minute.

Answer 21

350 gallons

Question 22

Absorption Booms

The small kit contains ___.

Answer 22

50 pads, five 48” socks, and four clean-up bags

Question 23

Absorption Booms

For larger spills, there are ____ Booms designed to be linked together for use on water or land.

Answer 23

sixteen 4”x10’ polypropylene oil-only

Question 24

These booms maintain their buoyancy even when saturated and can absorb up to ___ their own weight of the product.

Answer 24

25 times

Question 25

Booms do not absorb water, only ___.

Answer 25

hydrocarbon liquids

Question 26

The Foam Tender’s monitors have an effective reach of _____ without wind influence.

Answer 26

270 feet (with CAFS)

Question 27

0.3%, the lowest setting on the Class “A” foam metering valves; it can produce ____ of solution

Answer 27

60,000 gallons

Question 28

The horizontal reach of these monitors is in excess of ___.

Answer 28

250 feet

Question 29

Large water monitors: Together they can discharge___ per minute of water or foam.

Answer 29

3,500 gallons