TB 16 Syphon Ejector Flashcards
Penberthy” series ___ and ____.
65-A (1”) / 67-A (1 ½”)
Reference by size, i.e. 1” or 1 ½”, is with regard to the___.
inlet hose dimension
This ejector will permit water to be picked up from ______.
streams, lakes, swimming pools, and other sources of water
This appliance may be utilized where the ____, the water source makes it impractical to draft with hard suction hoses.
distance from, or the height above
The syphon ejector is actually _____.
a jet pump unit
Hose connection to the inlet is through a ____, thus allowing the inlet and discharge lines to lay ____.
180 degree return bend / parallel without kinks or bends.
Inlet nozzle for 1” is?
5/16” diameter
Inlet nozzle for 1 1/2” is?
1/2” diameter
The restriction provided by this nozzle converts the incoming fluid pressure into a ___.
high-velocity jet stream.
In the diffuser, the velocity of the water is converted to a pressure greater than the ____ but lower than the inlet “_____.
suction pressure / motivating” pressure.
The foot valve prevents loss of ____ through the suction.
water or back-flow
SERIES 65-A 1” will supply ____.
one 1” spray tip.
SERIES 67-A 1 ½” will supply ____.
Three 1” spray tips at 75 PSI np
Max Height
60’
SERIES 65-A 1”: at 60’
100 PSI / 120 PSI / 140 PSI / 160 PSI Give how much gpm
5 GPM / 16 GPM/ 27 GPM / 38 GPM
